Канал: Defender90 Keswick. Nigel's Land Rover channel.

SHE RUNS!!!!

SHE RUNS!!!!

Update on the build.

Update on the build.

A quick catch up and Fitting the Tub

A quick catch up and Fitting the Tub

Finished Tub reveal, Painting the Bulkhead and getting it protected with Waxoyl.

Finished Tub reveal, Painting the Bulkhead and getting it protected with Waxoyl.

Just a quick update...

Just a quick update...

Fitting one of the Gwyn Lewis Mud shield kits to my tub.

Fitting one of the Gwyn Lewis Mud shield kits to my tub.

Defender 90 Britpart Bulkhead bar install. part 6. Tub capping

Defender 90 Britpart Bulkhead bar install. part 6. Tub capping

Defender 90 Britpart Bulkhead bar install. Part 5.. must see!!

Defender 90 Britpart Bulkhead bar install. Part 5.. must see!!

Defender 90 Puma Bulkhead removal. Part Four

Defender 90 Puma Bulkhead removal. Part Four

Defender 90 Puma Bulkhead removal. Part 3

Defender 90 Puma Bulkhead removal. Part 3

Is it good or is it crap? Yuhtech riveter

Is it good or is it crap? Yuhtech riveter

Defender 90 Puma Bulkhead removal. Part 2

Defender 90 Puma Bulkhead removal. Part 2

Defender 90 Puma Bulkhead removal. Part One

Defender 90 Puma Bulkhead removal. Part One

Just a little update before we start some serious fabrication..

Just a little update before we start some serious fabrication..

Moan Moan Moan

Moan Moan Moan

Tamiya Land Rover Defender CC-01 build. Part Eight.

Tamiya Land Rover Defender CC-01 build. Part Eight.

My Bulkhead.. oh what a mess Land Rover made of it!!

My Bulkhead.. oh what a mess Land Rover made of it!!

2011 defender puma 2.4 Tdci restoration Update

2011 defender puma 2.4 Tdci restoration Update

Fitting the LOF clutch, Allisport downpipe and getting the Engine in.

Fitting the LOF clutch, Allisport downpipe and getting the Engine in.

Some goodies from Allisport

Some goodies from Allisport

Transmission in at last!!

Transmission in at last!!

Puma Output Shaft chat, clocking, fitting and building the Transmission

Puma Output Shaft chat, clocking, fitting and building the Transmission

Land Rover Puma Starter strip and rebuild.

Land Rover Puma Starter strip and rebuild.

Land Rover Puma 2.4 Tdci engine rebuild. Part 15... the end.

Land Rover Puma 2.4 Tdci engine rebuild. Part 15... the end.

Replacing the fan pulley bearing on a 2.4 Tdci Puma.

Replacing the fan pulley bearing on a 2.4 Tdci Puma.

Land Rover Puma 2.4 Tdci engine rebuild. Part 14 bits and bobs

Land Rover Puma 2.4 Tdci engine rebuild. Part 14 bits and bobs

Land Rover Puma 2.4 Tdci rebuild. Part 13

Land Rover Puma 2.4 Tdci rebuild. Part 13

Land Rover Puma 2.4 Tdci engine rebuild. Part 12.. shiny bits.

Land Rover Puma 2.4 Tdci engine rebuild. Part 12.. shiny bits.

Land Rover Puma 2.4 Tdci engine rebuild. Part 11 all about the timing.

Land Rover Puma 2.4 Tdci engine rebuild. Part 11 all about the timing.

Land Rover Puma 2.4 Tdci rebuild. Part10, getting the head on.

Land Rover Puma 2.4 Tdci rebuild. Part10, getting the head on.

Land Rover Puma 2.4 Tdci rebuild. Part 9.. Oil Pump

Land Rover Puma 2.4 Tdci rebuild. Part 9.. Oil Pump

Land Rover Puma 2.4 Tdci rebuild. Part 8, cylinder head refurbishment..

Land Rover Puma 2.4 Tdci rebuild. Part 8, cylinder head refurbishment..

Land Rover Puma 2.4 Tdci rebuild. Part 7.. back on track...

Land Rover Puma 2.4 Tdci rebuild. Part 7.. back on track...

Land Rover Puma 2.4 Tdci rebuild. Part 6..Two steps forward, three steps back....

Land Rover Puma 2.4 Tdci rebuild. Part 6..Two steps forward, three steps back....

Land Rover Puma 2.4 Tdci rebuild. Part 5.. Pistons are in!!

Land Rover Puma 2.4 Tdci rebuild. Part 5.. Pistons are in!!

Land Rover Puma 2.4 Tdci rebuild. Part 4.. Getting the Crank in...

Land Rover Puma 2.4 Tdci rebuild. Part 4.. Getting the Crank in...

Land Rover Puma 2.4 Tdci rebuild. Part 3 Manual omissions and piston rings.

Land Rover Puma 2.4 Tdci rebuild. Part 3 Manual omissions and piston rings.

Land Rover Puma 2.4 Tdci rebuild. Part 2, checking rod bearing clearances.

Land Rover Puma 2.4 Tdci rebuild. Part 2, checking rod bearing clearances.

Puma 2.4 Tdci engine build part one. Checking Crank bearing clearance.

Puma 2.4 Tdci engine build part one. Checking Crank bearing clearance.

Ashcroft HD Drive Flange Review and fit test.

Ashcroft HD Drive Flange Review and fit test.

MT-82 Gearbox rebuild. Part 3. The final!!

MT-82 Gearbox rebuild. Part 3. The final!!

Product review, L.O.F. "Power" Clutch bundle for Puma Defender.

Product review, L.O.F. "Power" Clutch bundle for Puma Defender.

MT-82 Gearbox rebuild. Part 2

MT-82 Gearbox rebuild. Part 2

Fitting the Super-Pro bushes and getting the axles under the chassis.

Fitting the Super-Pro bushes and getting the axles under the chassis.

Fitting the Ashcroft Locker diff. Part 2.

Fitting the Ashcroft Locker diff. Part 2.

Ashcroft Locker Diff fitting guide. Part One

Ashcroft Locker Diff fitting guide. Part One

Ashcroft Locker unboxing.

Ashcroft Locker unboxing.

Front Axle assembly. Part Three

Front Axle assembly. Part Three

Front Axle assembly. Part 2

Front Axle assembly. Part 2

Front Axle assembly. Part One

Front Axle assembly. Part One

Fitting the Ashcroft ATB into my front diff case.

Fitting the Ashcroft ATB into my front diff case.

Shiny rings from Bits4Landys

Shiny rings from Bits4Landys

Ashcroft ATB Diff unboxing and swivel progress.

Ashcroft ATB Diff unboxing and swivel progress.

How I reassemble the Puma Prop U/J's

How I reassemble the Puma Prop U/J's

Gwyn Lewis delivery unboxing.

Gwyn Lewis delivery unboxing.

Getting the Gearbox Xmember and Fuel tank in..

Getting the Gearbox Xmember and Fuel tank in..

Getting Waxoyl into the chassis

Getting Waxoyl into the chassis

More Painting and getting the swivels shimmed.

More Painting and getting the swivels shimmed.

2011 Defender 90 Diffs and Bushes

2011 Defender 90 Diffs and Bushes

Update on project rebuild.

Update on project rebuild.

I'm Back!!

I'm Back!!

My failed attempt at getting Waxoyl into my chassis....

My failed attempt at getting Waxoyl into my chassis....

Getting a little painting done....

Getting a little painting done....

Painted chassis reveal

Painted chassis reveal

Finally..we are painting the chassis!!

Finally..we are painting the chassis!!

Corroless QDR Chassis paint. It's brilliant!!

Corroless QDR Chassis paint. It's brilliant!!

Straightening the rear Crossmember on a late Defender. Part 2

Straightening the rear Crossmember on a late Defender. Part 2

Straightening the rear Crossmember on a late Defender. Part 1

Straightening the rear Crossmember on a late Defender. Part 1

Defender chassis stuff and help required please..

Defender chassis stuff and help required please..

Defender MT-82 gearbox rebuild. Part 1.

Defender MT-82 gearbox rebuild. Part 1.

Converting a 110 to a 90 in 1/35 scale.

Converting a 110 to a 90 in 1/35 scale.

Modifying the breather on the MT-82 gearbox

Modifying the breather on the MT-82 gearbox

Defender Puma MT82 Stripdown

Defender Puma MT82 Stripdown

Terrafirma axle truss fitting. Part 6

Terrafirma axle truss fitting. Part 6

Terrafirma axle truss kits fitting. Part 5

Terrafirma axle truss kits fitting. Part 5

Terrafirma axle truss fitting. Part 4 and Corroless S

Terrafirma axle truss fitting. Part 4 and Corroless S

Terrafirma Axle Trusses. Part 3, Front axle.

Terrafirma Axle Trusses. Part 3, Front axle.

Terrafirma Axle truss fitting. Part 2

Terrafirma Axle truss fitting. Part 2

Gwyn Lewis 4x4 Wading kits review

Gwyn Lewis 4x4 Wading kits review

Fitting Terrafirma axle trusses. Part 1

Fitting Terrafirma axle trusses. Part 1

Yes..I'm still here.. and back with you..

Yes..I'm still here.. and back with you..

I am still alive!!

I am still alive!!

Gwyn Lewis HD diff pans all done.. and they look great!!

Gwyn Lewis HD diff pans all done.. and they look great!!

Making a start on the Gwyn Lewis HD Rear diff pan.

Making a start on the Gwyn Lewis HD Rear diff pan.

Fitting the Gwyn Lewis HD Diff Pan. Part Three.

Fitting the Gwyn Lewis HD Diff Pan. Part Three.

A quick update on what's been going on!!

A quick update on what's been going on!!

Fitting the Gwyn Lewis HD Diff Pan. Part Two

Fitting the Gwyn Lewis HD Diff Pan. Part Two

Ebay Sandblaster unboxing and assembled first look.

Ebay Sandblaster unboxing and assembled first look.

Tamiya Land Rover Defender CC-01 build. Part Seven.

Tamiya Land Rover Defender CC-01 build. Part Seven.

Fitting the Gwyn Lewis HD diff pan. Part One

Fitting the Gwyn Lewis HD diff pan. Part One

MT82 Puma breather

MT82 Puma breather

Prepping for fitting the Gwyn Lewis HD Diff pan to the front axle

Prepping for fitting the Gwyn Lewis HD Diff pan to the front axle

Caliper wiper seal tool revisited..

Caliper wiper seal tool revisited..

Gwyn Lewis 4x4 goodies unboxing

Gwyn Lewis 4x4 goodies unboxing

Axle stripping, modifying and rebuilding. Part two.

Axle stripping, modifying and rebuilding. Part two.

Caliper wiper seals installation tool.

Caliper wiper seals installation tool.

Axle stripping, modifying and rebuilding. Part one.

Axle stripping, modifying and rebuilding. Part one.

Ashcroft ATB Centre Diff fitting.Part 6, Building the Transfer Box.

Ashcroft ATB Centre Diff fitting.Part 6, Building the Transfer Box.

Tamiya Land Rover Defender 90 CC-01 build.Part Six.

Tamiya Land Rover Defender 90 CC-01 build.Part Six.

Ashcroft ATB centre diff fitting. Part 5 Intermediate gears

Ashcroft ATB centre diff fitting. Part 5 Intermediate gears

Ashcroft ATB Centre Diff. Part 4a

Ashcroft ATB Centre Diff. Part 4a

Ashcroft ATB Centre Diff Part 4. Building the Diff assembly.

Ashcroft ATB Centre Diff Part 4. Building the Diff assembly.

Tamiya Land Rover Defender 90 CC-01 build. Part 5

Tamiya Land Rover Defender 90 CC-01 build. Part 5

Ashcroft ATB part 3a. More ramblings and a little progress.

Ashcroft ATB part 3a. More ramblings and a little progress.

Ashcroft ATB part 3. Intermediate shaft problems...problems....problems

Ashcroft ATB part 3. Intermediate shaft problems...problems....problems

Tamiya Land Rover Defender CC-01 build. Part Four.

Tamiya Land Rover Defender CC-01 build. Part Four.

Ashcroft ATB Centre diff part 2. Begin reassembly of LT230.

Ashcroft ATB Centre diff part 2. Begin reassembly of LT230.

Tamiya Land Rover Defender CC-01 build. Part Three

Tamiya Land Rover Defender CC-01 build. Part Three

A quick update on what I've been up to on my Puma 90.

A quick update on what I've been up to on my Puma 90.

Tamiya Land Rover Defender CC-01 build part two.

Tamiya Land Rover Defender CC-01 build part two.

Tamiya Land Rover Defender CC-01 build part one.

Tamiya Land Rover Defender CC-01 build part one.

Tamiya RC Land Rover 90 Build intro..for beginners.

Tamiya RC Land Rover 90 Build intro..for beginners.

Tamiya 1/10 RC Land Rover Defender 90 unboxing.

Tamiya 1/10 RC Land Rover Defender 90 unboxing.

Attempting to check/set my TC Input preload.

Attempting to check/set my TC Input preload.

Getting the chassis up on the Rotisserie part2

Getting the chassis up on the Rotisserie part2

Ashcroft ATB Centre Diff unboxing

Ashcroft ATB Centre Diff unboxing

Ashcroft ATB Centre diff part 1. Dismantle the LT230.

Ashcroft ATB Centre diff part 1. Dismantle the LT230.

Building the frames for the rotisserie. Part 1.

Building the frames for the rotisserie. Part 1.

Defender Puma stripdown completed!!

Defender Puma stripdown completed!!

Puma Defender strip down continues...

Puma Defender strip down continues...

A little catch up on what I've been up to and a look at my shaft.

A little catch up on what I've been up to and a look at my shaft.

Defender drop arm removal tool review.

Defender drop arm removal tool review.

Just a catch up..

Just a catch up..

My dismantled Puma, a video for Mike.

My dismantled Puma, a video for Mike.

Giving my disgusting valves a clean up.

Giving my disgusting valves a clean up.

HAPPY NEW YEAR. Puma Defender update

HAPPY NEW YEAR. Puma Defender update

2011 Defender Puma 90 Refresh. Engine out....

2011 Defender Puma 90 Refresh. Engine out....

Corroless S Primer on Defender parts with a Earlex HVLP system

Corroless S Primer on Defender parts with a Earlex HVLP system

Stripping the engine bay of my 2.4 TDCI Puma Land Rover Defender

Stripping the engine bay of my 2.4 TDCI Puma Land Rover Defender

Defender TDCI Puma Heater removal

Defender TDCI Puma Heater removal

Revell 1/24 Land Rover 109 Series III Model kit review

Revell 1/24 Land Rover 109 Series III Model kit review