Канал: Blaise Barrette

Rubber bands to pull the nasty bits away

Rubber bands to pull the nasty bits away

Part 41 (Making the motherboard)

Part 41 (Making the motherboard)

Part 40 (Aligning X axis ball screw)

Part 40 (Aligning X axis ball screw)

Part 39 (Adjusting front gibs on the table)

Part 39 (Adjusting front gibs on the table)

Part 38 (Finally time to put the table back where it belongs!)

Part 38 (Finally time to put the table back where it belongs!)

Part 37 (Adjusting the gibs under the saddle)

Part 37 (Adjusting the gibs under the saddle)

Part 36 - (Time for lube!)

Part 36 - (Time for lube!)

Part 35 - (Homing, sweet homing!!!)

Part 35 - (Homing, sweet homing!!!)

Part 34 - (Looking at the electronics)

Part 34 - (Looking at the electronics)

Using the end mill as an indexing stop to locate your stock

Using the end mill as an indexing stop to locate your stock

Part 33 - (Levelling the machine)

Part 33 - (Levelling the machine)

Part 32 - (It's alive!!!)

Part 32 - (It's alive!!!)

Part 31 - (Installing the Y axis ball screw)

Part 31 - (Installing the Y axis ball screw)

Part 30 - (A justing the center gibs on the saddle)

Part 30 - (A justing the center gibs on the saddle)

Part 29 - (Trimming the turcite)

Part 29 - (Trimming the turcite)

Part 28 - (FADAL project update)

Part 28 - (FADAL project update)

Part 27 - (New angular contact bearings for Y axis ballscew)

Part 27 - (New angular contact bearings for Y axis ballscew)

Part 26 - (Brand new way lube for the saddle)

Part 25 - (Metering valve values for the saddle lubrication)

Part 25 - (Metering valve values for the saddle lubrication)

Part 24 - (Repacking X axis ball screw)

Part 24 - (Repacking X axis ball screw)

Part 23 - (Repacking Y axis ball nut)

Part 23 - (Repacking Y axis ball nut)

Part 22 - (Looking at the Y axis Ball Screw assembly)

Part 22 - (Looking at the Y axis Ball Screw assembly)

Part 21 - (Introduction to the 3D model of the machine)

Part 21 - (Introduction to the 3D model of the machine)

Part 20 - (Installing the tool changer casting)

Part 20 - (Installing the tool changer casting)

Part 19 - (Inspecting the underside of the table)

Part 19 - (Inspecting the underside of the table)

Part 18 - (Painting)

Part 18 - (Painting)

Part 17 - (What's that?)

Part 17 - (What's that?)

Part 16 - (Removing the spindle 2 of 2)

Part 16 - (Removing the spindle 2 of 2)

Part 15 - (Removing the spindle 1 of 2)

Part 15 - (Removing the spindle 1 of 2)

Part 14 - (Removing the spindle pulley)

Part 14 - (Removing the spindle pulley)

Part 13 - (Removing the draw bar)

Part 13 - (Removing the draw bar)

Part 12 - (Draw bar cylinder)

Part 12 - (Draw bar cylinder)

Part 11- (Degreasing, cleaning, buffing, scrubbing)

Part 11- (Degreasing, cleaning, buffing, scrubbing)

Part 10 - (Metering valves values for the Z axis)

Part 10 - (Metering valves values for the Z axis)

Part 9 - (Inspecting the backside of the Z axis)

Part 9 - (Inspecting the backside of the Z axis)

Part 8 - (Looking at the spindle motor mount)

Part 8 - (Looking at the spindle motor mount)

Part 7 - (Inspecting the underside of the Y axis)

Part 7 - (Inspecting the underside of the Y axis)

Part 5 - (Cleaning and inspecting the Z gibs)

Part 5 - (Cleaning and inspecting the Z gibs)

Part 6 - (Removing way lube on Y axis)

Part 6 - (Removing way lube on Y axis)

Part 4 - (Removing Z axis)

Part 4 - (Removing Z axis)

Part 3 - (Removing the spindle motor)

Part 3 - (Removing the spindle motor)

Part 2 - Fadal VMC 4020 CNC (Removing the tool changer Casting)

Part 2 - Fadal VMC 4020 CNC (Removing the tool changer Casting)

Part 1 - Fadal VMC 4020 CNC reconditioning

Part 1 - Fadal VMC 4020 CNC reconditioning

Followup on live stream with Brad Talis

Followup on live stream with Brad Talis

Runout filament sensor

Runout filament sensor

Phoque à Tartigou

Phoque à Tartigou

Grand héron bleu

Grand héron bleu

Voile au Lac Towago

Voile au Lac Towago

Voile au lac Towago

Voile au lac Towago

Ver éventail à identifier

Ver éventail à identifier

Poisson d'eau douce à identifier

Poisson d'eau douce à identifier

Espèce à identifier

Espèce à identifier

Ver non identifié

Ver non identifié

Espèce de concombre de mer inconnu

Espèce de concombre de mer inconnu

Nudibranche inconnu

Nudibranche inconnu

Les Ilets aux Méchins (Bas St-Laurent, Québec)

Les Ilets aux Méchins (Bas St-Laurent, Québec)

lévitation

lévitation

Ces Voix Oubliées 2007

Ces Voix Oubliées 2007

Images sous-marines du St-Laurent

Images sous-marines du St-Laurent