Канал: bradthebikeboy

Ducati Monster 659 696 796 Refitting Timing shaft pullies, Timing belts without marks, Cam timing.

Ducati Monster 659 696 796 Refitting Timing shaft pullies, Timing belts without marks, Cam timing.

Fitting cylinders and heads to the Monster 659 engine

Fitting cylinders and heads to the Monster 659 engine

Refitting the alternator cover to the Monster 659 engine.

Refitting the alternator cover to the Monster 659 engine.

Ducati gear shifter mechanism spring replacement and shifter setting.

Ducati gear shifter mechanism spring replacement and shifter setting.

Ducati 6mm tapered collet valve shims - 749S, 749R, 999R

Ducati 6mm tapered collet valve shims - 749S, 749R, 999R

Adjusting Ducati Testastretta 749 998 999 Valve Clearances

Adjusting Ducati Testastretta 749 998 999 Valve Clearances

Disassembling 40mm Forcella Italia fork compression adjusters Ducati 750F1

Disassembling 40mm Forcella Italia fork compression adjusters Ducati 750F1

Ducati 6mm valve stem tapered collet valve clearances - 749S, 749R, 999R

Ducati 6mm valve stem tapered collet valve clearances - 749S, 749R, 999R

Ducati 998 throttle body rambling to go with the TPS setting report.

Ducati 998 throttle body rambling to go with the TPS setting report.

Refitting a Ducati alternator cover and lining up the water pump drive shaft tongue and groove.

Refitting a Ducati alternator cover and lining up the water pump drive shaft tongue and groove.

Ducati rear axle spacer orientation - the conical one on the LH side on dual sided swingarm models.

Ducati rear axle spacer orientation - the conical one on the LH side on dual sided swingarm models.

Ducati rear sprocket replacement and tightening the sprocket studs in the sprocket carrier.

Ducati rear sprocket replacement and tightening the sprocket studs in the sprocket carrier.

Load testing a battery that's a bit dodgy.

Load testing a battery that's a bit dodgy.

Fitting rings to pistons and pistons into cylinders - Monster 659

Fitting rings to pistons and pistons into cylinders - Monster 659

Ducati DS cylinder head strip for reco and then refitting rockers and valve stem seals.

Ducati DS cylinder head strip for reco and then refitting rockers and valve stem seals.

Ducati belt drive oil pump: variations, disassembly, reconditioning, rambling

Ducati belt drive oil pump: variations, disassembly, reconditioning, rambling

Removing and reinstalling the starter motor end cap on a 659 engine with the starter installed.

Removing and reinstalling the starter motor end cap on a 659 engine with the starter installed.

Fitting a Ducati 1000/1100 DS crankshaft to an ST2, M900 or 900SSie

Fitting a Ducati 1000/1100 DS crankshaft to an ST2, M900 or 900SSie

Engine reassembly - Alternator side of the Monster 659.

Engine reassembly - Alternator side of the Monster 659.

Adjusting cam timing using offset keys - Ducati Desmoquattro 916

Adjusting cam timing using offset keys - Ducati Desmoquattro 916

Measuring piston ring end gaps

Measuring piston ring end gaps

Measuring piston to bore clearance Ducati Monster 659

Measuring piston to bore clearance Ducati Monster 659

Changing gearbox ratios on my M659 engine on first, second and sixth - how, why, etc

Changing gearbox ratios on my M659 engine on first, second and sixth - how, why, etc

Assembling Ducati crankcases - crank, gearbox, etc. Monster 659 in this instance

Assembling Ducati crankcases - crank, gearbox, etc. Monster 659 in this instance

Measuring big end bearing clearance and fitting the connecting rods to the crank on my Ducati 659

Measuring big end bearing clearance and fitting the connecting rods to the crank on my Ducati 659

Ducati SS and Monster Mikuni Idle mixture adjustment on the gas analyser and rambling.

Ducati SS and Monster Mikuni Idle mixture adjustment on the gas analyser and rambling.

Ducati Primary Drive Cover Crank seals - The right way and the wrong way.

Ducati Primary Drive Cover Crank seals - The right way and the wrong way.

Fork Seal Orientation - which side gets wet, which side hopefully doesn't.

Fork Seal Orientation - which side gets wet, which side hopefully doesn't.

Ducati Belt Drive crankshaft variations for 1980 to 2015 ish ball bearing mains engines

Ducati Belt Drive crankshaft variations for 1980 to 2015 ish ball bearing mains engines

Brake lever free play and how to check - in this instance a Ducati 916.

Brake lever free play and how to check - in this instance a Ducati 916.

M900ie 2000 - 2001 unique front sprocket

M900ie 2000 - 2001 unique front sprocket

Ducati engine swap - time lapse of how I do it. 1198

Ducati engine swap - time lapse of how I do it. 1198

Chain tension, variation thereof, tightest point, the swingarm sticker, associated rambling, etc

Chain tension, variation thereof, tightest point, the swingarm sticker, associated rambling, etc

Ducati gear shift mechanism setting procedure - the internal linkage.

Ducati gear shift mechanism setting procedure - the internal linkage.

Ducati Charging System Diagnosis

Ducati Charging System Diagnosis

Ducati 748 916 996 - Things that happen when they've been sitting for some time and other rambling

Ducati 748 916 996 - Things that happen when they've been sitting for some time and other rambling

Ducati Belt Drive 2V Cylinder head strip for reco - in this case 900SS

Ducati Belt Drive 2V Cylinder head strip for reco - in this case 900SS

Loose rear wheel bearings - Ducati 900SS

Loose rear wheel bearings - Ducati 900SS

Ducati crankcase bearings replacment belt drive twin - in this case an M696.

Ducati crankcase bearings replacment belt drive twin - in this case an M696.

Removing the Showa 41mm adjustable fork compression adjuster

Removing the Showa 41mm adjustable fork compression adjuster

Ducati plastic fuel tank drain and vent circuit nipples corroding and blocking.

Ducati plastic fuel tank drain and vent circuit nipples corroding and blocking.

Removing Ducati Dry Clutch Cover and Pressure Plate.

Removing Ducati Dry Clutch Cover and Pressure Plate.

Checking Piston to Valve clearance on a Ducati with the engine assembled - in this instance a 900 2V

Checking Piston to Valve clearance on a Ducati with the engine assembled - in this instance a 900 2V

Showa adjustable fork seal replacement 41 and 43mm Ducati 1991 - 2013 or so, in this case an ST4S

Showa adjustable fork seal replacement 41 and 43mm Ducati 1991 - 2013 or so, in this case an ST4S

Cleaning front brake discs after fork oil leaks

Cleaning front brake discs after fork oil leaks

Ducati 2V traditional non DS style valve clearances, timing belt and cam timing videos.

Ducati 2V traditional non DS style valve clearances, timing belt and cam timing videos.

Ducati Multistrada 1200 DVT Timing Belt Replacement / Position Reset

Ducati Multistrada 1200 DVT Timing Belt Replacement / Position Reset

Ducati Desmoquattro Timing Belt Change 748 851 888 916 996 Monster S4 ST4 ST4S

Ducati Desmoquattro Timing Belt Change 748 851 888 916 996 Monster S4 ST4 ST4S

Ducati Front Sprocket Retaining Plate

Ducati Front Sprocket Retaining Plate

Ducati 7mm valve collets - filing and rambling

Ducati 7mm valve collets - filing and rambling

Ducati Desmoquattro 748 851 888 916 96 ST4 ST4S S4 S4R Valve Clearance Adjustment

Ducati Desmoquattro 748 851 888 916 96 ST4 ST4S S4 S4R Valve Clearance Adjustment

Ducati 2V Non Linear Throttle Position Sensor Setting Procedure - 620, 750, 900 SSie, Monster, ST2

Ducati 2V Non Linear Throttle Position Sensor Setting Procedure - 620, 750, 900 SSie, Monster, ST2

Ducati 2V throttle body set up and tuning for SSie, Monster ie and ST2

Ducati 2V throttle body set up and tuning for SSie, Monster ie and ST2

Weber Marelli 1.6M ECU Idle trimmer

Weber Marelli 1.6M ECU Idle trimmer

Ducati Desmoquattro TPS Throttle Position Sensor baseline setting - ST4S

Ducati Desmoquattro TPS Throttle Position Sensor baseline setting - ST4S

Checking battery current draw with ignition off battery going flat.

Checking battery current draw with ignition off battery going flat.

Ducati Throttle Body set up and idle setting for ST4S, ST4, MS4, MS4R, 748, 916, 996

Ducati Throttle Body set up and idle setting for ST4S, ST4, MS4, MS4R, 748, 916, 996

Ducati radiators - Checking the baffle plate in the radiator LH tank (ST4S in video)

Ducati radiators - Checking the baffle plate in the radiator LH tank (ST4S in video)

916 Fuel pump take 2 - Working out why the replacement wouldn't work

916 Fuel pump take 2 - Working out why the replacement wouldn't work

Ducati Steering Head Bearings - OEM balls versus tapered rollers fitment.

Ducati Steering Head Bearings - OEM balls versus tapered rollers fitment.

Ducati 2V Small block cylinder stud spacing and other stuff

Ducati 2V Small block cylinder stud spacing and other stuff

Ducati wet clutch replacement pre 1998

Ducati wet clutch replacement pre 1998

Ducati Pantah 750 F1 Bosch pick up replacement

Ducati Pantah 750 F1 Bosch pick up replacement

Ducati Testastretta Evo 821 848 939 1098 1198 1200 Valve Clearance check and adjustment

Ducati Testastretta Evo 821 848 939 1098 1198 1200 Valve Clearance check and adjustment

Ducati Connecting Rods - big end and small end location.

Ducati Connecting Rods - big end and small end location.

Ducati clutch fluid flush and bleed and lever freeplay discussion for radial master cylinders.

Ducati clutch fluid flush and bleed and lever freeplay discussion for radial master cylinders.

916 fuel pump problem

916 fuel pump problem

ST3 Valve clearance check and adjustment and rambling

ST3 Valve clearance check and adjustment and rambling

1198 Timing Belt fitment

1198 Timing Belt fitment

1198 cam timing

1198 cam timing

749 / 999 Showa fork cartridge fitment style and a tool to hold them.

749 / 999 Showa fork cartridge fitment style and a tool to hold them.

Ohlins Fork Seal Replacement time warp style

Ohlins Fork Seal Replacement time warp style

Leak down test ramblings on a Ducati 1198

Leak down test ramblings on a Ducati 1198

Ducati DS style 2V belt fitting and tension - 659, 696, 796, 1000. 1100 engines

Ducati DS style 2V belt fitting and tension - 659, 696, 796, 1000. 1100 engines

Ducati Failed ball style main bearing noise

Ducati Failed ball style main bearing noise

Ducati Testastretta 749 998 999 Timing belt replacement

Ducati Testastretta 749 998 999 Timing belt replacement

Ducati Fuel Cap Reassembly

Ducati Fuel Cap Reassembly

400SS running on its way back together

400SS running on its way back together

Ducati 7mm closing valve shims

Ducati 7mm closing valve shims

Ducati 659 696 796 Engine - Valve clearance, Timing belts Cam timing - part 5

Ducati 659 696 796 Engine - Valve clearance, Timing belts Cam timing - part 5

Ducati 659 696 796 Engine - Valve clearance, Timing belts Cam timing - part 4

Ducati 659 696 796 Engine - Valve clearance, Timing belts Cam timing - part 4

Ducati 659 696 796 Engine - Valve clearance, Timing belts Cam timing - part 2

Ducati 659 696 796 Engine - Valve clearance, Timing belts Cam timing - part 2

Ducati 659 696 796 Engine - Valve clearance, Timing belts Cam timing - part 3

Ducati 659 696 796 Engine - Valve clearance, Timing belts Cam timing - part 3

Ducati 659 696 796 Engine - Valve clearance, Timing belts Cam timing - part 1

Ducati 659 696 796 Engine - Valve clearance, Timing belts Cam timing - part 1

Ducati Mikuni carb reassembly part 2

Ducati Mikuni carb reassembly part 2

Ducati Mikuni carb reassembly part 1

Ducati Mikuni carb reassembly part 1

851 first start in 13 years

851 first start in 13 years

Ducati Monster Mikuni carb slide dyno run

Ducati Monster Mikuni carb slide dyno run

Ducati Monster Dyno run custom 2-1 Danmoto muffler without baffle

Ducati Monster Dyno run custom 2-1 Danmoto muffler without baffle

Ducati Monster Dyno run custom 2-1 Danmoto muffler with baffle

Ducati Monster Dyno run custom 2-1 Danmoto muffler with baffle

Ducati Monster 750 with Megacycle mufflers

Ducati Monster 750 with Megacycle mufflers

Ducati Monster 750 with Danmoto Jisu mufflers

Ducati Monster 750 with Danmoto Jisu mufflers