Buy Now!
New Tie Rod Set from 1AAuto.com [ Ссылка ]
New Tie Rod from 1AAuto.com [ Ссылка ]
The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms. This video shows you how to replace the inner tie rods on your 2004-2008 Nissan Maxima.
• Check here for more videos on the 2004-08 Nissan Maxima: [ Ссылка ]
This repair was done on a 2008 Nissan Maxima SE 3.5L and the process should be similar on the following vehicles:
2004 Nissan Maxima
2005 Nissan Maxima
2006 Nissan Maxima
2007 Nissan Maxima
2008 Nissan Maxima
Tools you will need:
• 21mm wrench
• 17mm Socket [ Ссылка ]
• 21mm Socket
• 22mm Socket [ Ссылка ]
• Inner Tie Rod Removal Tool [ Ссылка ]
• Pickle Fork
• Locking Pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Straight Cutters
• 3/8 Inch Impact Gun
• Ratchet [ Ссылка ]
• Socket Driver
• Torque Wrench [ Ссылка ]
• Bearing Grease
• Liquid Thread Locker
• Wire Ties
• Center Punch [ Ссылка ]
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Wheel Chocks
Subscribe: [ Ссылка ]
Check out our playlist:
Nissan Maxima 6th Generation 2004-2008: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
