[ Ссылка ]
0:00 Watch this under-power demonstration of a Used HPM Model: II-900-A 900 Ton Horizontal Cold Chamber Aluminum High Pressure Die Casting Machine.
0:15 After solidification, the moving platen opens as it sends a signal to the extractor. The robot extractor will come in between the dies and grab the biscuits and pull the part out.
0:27 The extractor will now send a signal to the reciprocator to allow the reciprocator to come in between the dies and spray lubrication and air.
The reciprocator will go back to home position and send a signal to the die cast machine that it is fully out of the die.
0:51 The reciprocator will go back to home position and send a signal to the die cast machine that it is fully out of the die.
1:00 The moving platen will now close and lock. The die casting machine will send a signal to the shot end to pull back the plunger. The shot end will send a signal to the ladle letting it know it is fully back allowing the ladle to pour metal into the shot well.
1:22 The ladle will now send a signal to the shot end to allow it to make its shot.
Please visit our website to view all available cold chamber die casting machines at: [ Ссылка ]
