**Hit that SUBSCRIBE button, you know you want to!!**

BUY ME A BEER 🍺 Doing so will help support the channel and allow me bring you even more brewing content! thanks and Cheers! 🍻 [ Ссылка ]

In this video I show you how to make your own jockey box to be able to serve your homebrew at events and make sure it stays cold. Below are the parts and dimensions you will need to make your own. Each item is for a single tap/line. If you want more taps, just multiple these amounts by the number of taps you want to build.

Parts:
Cooler (48 qt allows 4 taps) any brand works but want a flat front or back to mount tap handles:
[ Ссылка ]
Standard Faucet with 3" Shank:
[ Ссылка ]
Ball Lock Quick Connects:
1 set: [ Ссылка ]
2 sets: [ Ссылка ]
Hose Clamps:
Standard screw (25 pack): [ Ссылка ]
Easy Turn (20 pack): [ Ссылка ]
Vinyl Tubing (beer lines):
10 ft of 3/16 ID x 5/16 OD (Thinner line):
[ Ссылка ]
5-6 feet (or 16 feet total if not using thinner line above) of 3/16 ID x 7/16 OD (Thicker/typical serving line):
[ Ссылка ]

If using two different beer hose types, you will need 3/16 hose barb connectors:
[ Ссылка ]
CO2 3/8 ID Tubing:
[ Ссылка ]

If having more than one keg connection, you will need 3/8 Barbed splitter/adaptors:
T style (two kegs):[ Ссылка ]
X style (three kegs): [ Ссылка ]
*note* You will need both if doing 4 kegs/taps, or three T style to split four ways.

Tools:
Drill
1/2 inch drill bit
1 inch hole drill bit
Screwdriver
Scissors or utility knife to cut tubing

You can see all the exact equipment I use in my videos at my Amazon page here:
[ Ссылка ]

Other DIY Videos:
Video on the Cold Crash Guardian:
[ Ссылка ]
DIY wort immersion chiller:
[ Ссылка ]
DIY Hop Spider:
[ Ссылка ]
DIY Mash Tun:
[ Ссылка ]
DIY Fermentation Chamber:
[ Ссылка ]
Turn an Old Fridge into a Kegerator:
[ Ссылка ]

свернуть