RadioLink RC8X transmitter comes with RadioLink R8FG receiver. And R8FG receiver is already installed in the car now.
Push the throttle trigger and turn the wheel, the car responds well. So we can see there is no problem of signal transmission.
Put RC8X closer to the car, then Push the throttle trigger or turn the wheel, there is no response, which means the signal is lost. Why the Signal is Lost When RC8X Transmitter is Too Close to the Model?

The problem is caused by signal block. There is signal amplification for dual antenna receiver, such as R8FG, R7FG and R8F. so it is best to keep RC8X and R8FG receiver more than 60 centimeters apart when binding or after binding.
If the transmitter and R8FG receiver are too close when binding, it is easy to cause signal block, and the binding cannot be successful. After the binding is successful, if transmitter and R8FG receiver are too close (for example, within 60 centimeters), the signal may also be lost because of signal block. Bring RC8X transmitter and R8FG receiver farther apart, the signal loss will disappear automatically. So please do not keep RC8X too close to your model when binding or operating the model.

For more details of RadioLink RC8X:
[ Ссылка ]

Purchase link of RadioLink RC8X:
[ Ссылка ]

You can send mails to after_service@radiolink.com.cn if you have any questions during using our products.

#fpvracing #fpv#rctransmitter #radiolink #rc8x

свернуть