The Stow 'n Go feature on your 2021 Chrysler Pacifica or Voyager makes the most of your vehicle's cargo area by allowing the rear seats to fold away into the storage area. You will learn more about the Stow 'n Go seating and how to easily switch between the various stowing positions.
Transcript
[music playing]
If equipped, the Chrysler Pacifica Stow ‘N Go feature provides convenient, in-floor storage for your cargo, and the option to stow the seats themselves when you need the extra space.
You’ll find a storage bin under the floor mat in front of each second row seat. You may need to move the front seat forward to fully open the floor panel. Use the manual seat adjustment bar, or the Advance ‘n Return button on the B pillar trim, if equipped.
To open the panel, push the lock rod in, then pull up on the latch handle near the seat. Fold the top half down and let the panel stand fully open. To close the panel, grab the bottom corner and extend it out. Lay the panel flat and push it down until it clicks into position.
To stow the 2nd row seats, first move the front seat forward. Make sure the second row armrests are folded up. Open the floor panel and lean it against the front seat. Now, pull the Stow ‘N Go strap on the bottom of the second row seat and let it fold forward. Guide the seat down into the storage bin and give it an extra push if necessary. Tuck the strap, close the panel, and readjust the front seat as needed.
To unstow the seat, move the front seat forward and open the floor panel. Then, pull the strap on the seat and raise it up out of its storage bin. Push back on the seat until it latches into the floor. Fold the seatback into the upright position, pull the headrest up, and close the floor panel.
For easy access to the third row, you have a couple options.
First, you can fold the 2nd row seat flat by pulling up on the recline lever – just make sure the armrests are folded up. When you’re done, pull the handle again, and push the seatback to the upright position. Or, if there’s a child seat installed, locate the easy tilt seat handle on the back of the second row seat, and pull it to tilt the seat forward. To return the seat to its original position, simply push on the seatback until it locks in place.
Your third row seats can be also be folded flat. To fold the left seat, or both seats together, first you’ll have to lower the center headrest down to the seatback.
For manual seats, pull the lower strap - labeled number 1 - to release the anchors. Now, pull strap number 2, and the seat will fold and tumble into the storage bin.
To unfold the seats, pull up on the assist strap to lift the seat out of the bin, and push the seat forward until the anchors latch. Then, pull strap number 2 to release the seatback and return it to the full upright position.
If your vehicle is equipped with the one-touch power folding seat, you’ll find the switch bank on the right rear trim panel. The switch only works when the liftgate is open and you shift into Park. With the center seatbelt unbuckled, lower the center headrest, and place the outboard seatbelts behind the stow clips on the trim panels. Now, you can recline, fold, or unfold the seats with the touch of a button.
This video is not intended to take the place of your Owner's Manual. For complete details and other important safety information, please see your Owner's Information.
[Text on screen] Copyright 2020 FCA US LLC. All Rights Reserved. Chrysler and Mopar are registered trademarks of FCA US LLC.
