Buy Now!
New CV Axle Assembly from 1AAuto.com [ Ссылка ]
This video shows you how to install a new CV axle assembly in your 2011-2016 Hyundai Elantra. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This repair was done on a 2013 Hyundai Elantra GLS 1.8L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2011 Hyundai Elantra
2012 Hyundai Elantra
2013 Hyundai Elantra
2014 Hyundai Elantra
2015 Hyundai Elantra
2016 Hyundai Elantra
Tools you will need:
• Pry Bar [ Ссылка ]
• 19mm Wrench [ Ссылка ]
• 14mm Socket [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket
• 21mm Socket
• 32mm Socket [ Ссылка ]
• Ball Joint Press
• CV Axle Shaft Popper Tool
• Pliers
• Torque Wrench [ Ссылка ]
• Copper Anti-Seize
• Cotter Pin
• Rust Penetrant
• Drain Pan
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Large Hammer
• Pole Jack
• Punch
• Sledge Hammer
Subscribe: [ Ссылка ]
Check out our playlist:
Hyundai Elantra 2011-2016 5th Generation: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
