Key points for the operation of multifunctional metal combined punching and shearing machine:
1. Check the power supply, ensure that the voltage is stable, there is no phase loss, and the leakage protector and air switch are in good condition.
2. Connect the wires, open the joint punching and shearing machine wiring cabinet, connect the wires, and close the cabinet door.
3. After powering on, press the foot switch and the machine will not move. Swap the power cord and check if the emergency stop switch is turned on.
4. Connect the foot pedal switch.
5. During work, pay attention to turning off the power every time the mold is changed
6. After completing the work, turn off the switch, turn off the main power switch, remove the power cord, and clean the debris.

More information please contact us
E-mail：sichuangjx@126.com
WhatsApp：+8618831909331
Phone/WeChat：+8618831909331
Website：[ Ссылка ]

свернуть