We are one of the leading organization occupied in providing brilliant quality False Celling Machine, which are producing by using high grade material. We designed a lots kinds of False Celing Channel roll forming machine. due to the high graded superiority and our client fulfillment, The product by Ultra False Ceiling roll forming machine has many benefit such as beautiful and colorful outside, light weigh, long life durability. It was widely used in every corn world wide. we can develop special Roll Forming Machine as per customer requirement.

De coiler 200 KG cap.
Entry Gate with
Roll Forming Line with 8 station , 1 Gear Boxes & 5 H.P. electrical.
Control Panel semi auto
Cutting Unit
Technical Specifications : (Plate body)
Maximum sheet width that can be formed : 380 mm
Maximum sheet thickness in CRCA Strips that can be formed : 0.5 mm
Vertical distance between shafts : 165 mm
Horizontal distance between shafts : 165 mm
Number of forming stations : 8 nos.
Vertical station : 2 nos.
Total HP for Line : 7(ABB)
Speed of the machine : 7mt/minute
Size of machine : 2300 x 1100 x 1100 mm
Mandrel Uncoiler
Coil weight : 250 KG Max
Coil width : 200 MM
Coil bore : 450 MM min, 510 MM max dia.
Mandrel movement : Manually adjusted
Back Tension : Manually adjusted
Entry Gate
Entry gate will be provided for movement of sheet to roll former.

Main Base
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)
The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts
The roll shafts dia. 40mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive
The drive to the roll former will be by means of a gear box system. The main drive will be provided by means of 2 HP motor

Tooling
One set of Tooling with EN31 grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, bore grinding, profile machining and inspection with final template for above.

свернуть