Add some flair to your Tesla Model 3 or Y with these OLED tail lights. These luxurious tail lights are designed with full sequential LED indicator operation and striking start-up animation to make a statement everywhere you go.
🔌 Plug and play with no modifications or coding required - It's as simple as that!
Get yours here 👉🏻 [ Ссылка ]
- Chapters -
00:00 - Introduction
00:17 - In The Box
00:30 - Boot Cover Panel Removal
00:52 - Unscrew Nuts Securing Tail Light
01:03 - Unplug Tail Light Wiring
01:11 - Remove Top Screw
01:18 - Remove Tail Light
01:22 - Install New Light
01:43 - Tighten Top Screw
01:53 - Fasten New Tail Light
02:05 - Plug New Light Into Factory Harness
02:09 - Repeat Process On Other Side
02:16 - Unscrew Nuts Securing Light
02:26 - Unplug Light From Harness
02:32 - Remove Factory Light
02:39 - Install New Light
02:44 - Secure New Light
02:58 - Remove Tail Gate Trim
03:18 - Unplug Inner Light
03:32 - Unscrew Nut Securing Inner Light
03:43 - Pop Out Factory Inner Light
03:54 - Install New Inner Light
04:08 - Secure New Light
04:16 - Plug In Wiring Hareness
04:40 - Repeat On Other Side
05:42 - Wiring Explained
06:00 - Loosen Rubber Seals
06:18 - Run New Wires
06:41 - Feed Wiring Through Sleeve
07:33 - Run Wires Through Tail Gate
07:45 - Plug Wires Into Harness
08:04 - Run Wires For Left Side
08:18 - Run Wires Through Boot
08:27 - Run Wires Through Sleeve
08:53 - Plug Wires Into Harness
08:59 - Place Back Rubber Seals
09:30 - Zip-Tie Wiring Onto Boot
09:38 - Re-install Tail Gate Trim
10:06 - Tuck and Tidy Carpet
10:14 - Replace Boot Trim
11:00 - Showcase
💳 AfterPay & Zip Pay Available
🔧 Installation Available
🇦🇺 Australian Owned & Operated
🌐 www.iilumo.com
📞 1800 003 888
📍 Worldwide Shipping
