If you need parts, try...

Glow Plugs - (UK) - [ Ссылка ]
Glow Plugs - (USA) - [ Ссылка ]
Test Meter (Multimeter) - (UK) - [ Ссылка ]
Multimeter (Test Meter) - (USA) - [ Ссылка ]
Glow Plug Removal Tools - (UK) - [ Ссылка ]
Glow Plug Removal Tools - (USA) - [ Ссылка ]
Jump Leads - (UK) - [ Ссылка ]
Jumper Cables - (USA) - [ Ссылка ]

Disclosure: The links above are 'affiliate links' This means we may garner a small commission (at no cost to you) if you choose to make a purchase. Thanks for your support... 😃

For more information, see: [ Ссылка ]

Other Videos:
- With a test meter: [ Ссылка ]
- Without a test meter: [ Ссылка ]

How to Perform a Glow Plug Continuity Test:

If your test meter can’t read low resistance (1 to 6 ohms), or you don’t have a multimeter? Do a continuity check.

A continuity check will test if there is an open circuit (check if the glow plug is broken internally). You can check continuity with a cheap & simple ‘buzzer’ or ‘light probe’ tester. If you don’t get a ‘buzz’, or a glow from the light, (the glow plug is open circuit) and is defective!

It’s very easy to check, even if you don’t have a test meter (multimeter). To get the best results, remove the glow plug before testing.

свернуть