This is an educational video showing just how simple it is to flash in DTS Monaco, over DoIP (Diagnostic over Internet Protocol).
For the purpose of the video, we flashed a HU5es2 control unit.

These newer units can ONLY be flashed over DoIP. Trying to flash them via CAN, will very likely brick your control unit, so that should not be attempted, under any circumstances!

A DoIP hardware is required to flash these newer units.
Such a hardware can be an SDConnect C4 DoIP, ECOM or VCX SE.

DoIP brings signifficant advantage versus CAN, by that it is much faster (eg. flashing times take a few minutes, instead of several hours, telematics disks are not needed anymore, etc etc).

Once you own the equipment, it will need to be correctly set up.

There are online guides available, that show how to set up these devices.
Still, if you need help, please contact us, we'll be happy to help!

A big archive was used, which is accompanied by a bin file.
The only important thing is for the bin file to be in the same folder as the SMR-F file.
No need to interact with it in any other way.

We hope to have the DoIP flashing capability implemented in our MBTools app, very soon!
Until then, hope this video guide can help you!

More on [ Ссылка ]

свернуть