Putting my new (to me) Morse G3 16/35mm processing tank to the test. This is my first attempt at processing a 100' roll of Kodak Tri-X (7278) film with it. I shot the roll with my Arriflex 16S in my office, using my Georg Jensen crystal sync motor and lavalier mic with Tascam digital recorder. The results were scanned in 2K on my MovieStuff RetroScan Universal Mark 1.
Audio recorder - Tascam DR-05X: [ Ссылка ]
Microphone - BOYA BY-M1 Lavalier: [ Ссылка ]
Film Scanner: MovieStuff Retroscan Universal Mark I (2K)
My process for this roll:
Developer: HC110-B @ 66° F for 16.75 minutes (14 cycles).
Stop Bath: Cold tap water (4 cycles)
Fix: Kodak Standard Powder @ 66° F for 15 minutes (12 cycles).
Wash: Cold tap water (14 cycles)
Photo-Flo for 4 cycles then hang to dry.
Equipment I used to make this YouTube Video:
Canon M50 (4K @ 24P): [ Ссылка ]
BOYA BY-M1 Microphone: [ Ссылка ]
Affiliate Links:
============
Some of the links in my video descriptions are affiliate links, which means, at no extra cost to you, I will make a small commission if you click them and make a purchase.
Please don't forget to Like, Subscribe & leave me a Comment! Thanks!
#MorseG3 #MorseG3ProcessingTank #Arriflex16S #Arri16S #Arriflex16mm #KodakTriX #Kodak16mmFilm #16mmFilmmaking #16mmFilmmaker #FloridaFilmmaker #FilmFlorida #FilmIsNotDead #StayBrokeShootFilm #Filmboy24
