Buy Now!
New Control Arm from 1AAuto.com [ Ссылка ]

This video shows you how to install new control arms in your 2012-2018 Nissan Altima. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle.

This repair was done on a 2016 Nissan Altima Base 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Nissan Altima
2013 Nissan Altima
2014 Nissan Altima
2015 Nissan Altima
2016 Nissan Altima
2017 Nissan Altima
2018 Nissan Altima

Tools you will need:
• Pry Bar [ Ссылка ]
• 18mm Wrench
• 21mm wrench
• 10mm Socket [ Ссылка ]
• 13mm Socket [ Ссылка ]
• 18mm Socket
• 21mm Socket
• Ratchet [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Cloth Rags [ Ссылка ]
• Gloves [ Ссылка ]
• Liquid Thread Locker
• Safety Glasses
• Chisel [ Ссылка ]
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Pole Jack
• Wheel Chocks

Subscribe: [ Ссылка ]

Check out our playlist:
Nissan Altima 5th Generation 2012-2018: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть