This is a 2012 Toyota Prius EGR and EGR cooler remove and install. We removed this at 140k to clean the carbon build up from the exhaust gases over time. It keeps the engine running more efficiently. If the EGR system gets clogged, combustion temps will get too hot and will damage engine in the long run. If you get code p0401 egr flow insufficient, its caused by excess carbon, and doing this will help clear the code. If it's clogged excessively, or if its stuck open or stuck closed, then you might have to replace the parts.
Please refer to our
"Spark plugs remove and install"
[ Ссылка ]
and
"EGR pipe cleaning"
[ Ссылка ]
videos before proceeding with this video.
Tools:
[ Ссылка ] 3/8 ratchet
[ Ссылка ] 1/4 Ratchet
[ Ссылка ] 1/4-Inch Drive Finger Ratchet
[ Ссылка ] 3/8 short extension set
[ Ссылка ] 3/8 10mm deep socket
[ Ссылка ] 3/8 14mm socket
[ Ссылка ] 10mm wrench
[ Ссылка ] 3/8 12mm socket
[ Ссылка ] 1/4" Drive Torx Socket E-8
[ Ссылка ] Finger Ratchet
[ Ссылка ] Flat head screw driver
[ Ссылка ] needle nose Pliers set
[ Ссылка ] Hose clamp tool
[ Ссылка ] Hook and Pick Set (to get those plastic clips)
[ Ссылка ] Drills
[ Ссылка ] Brass, Nylon and Stainless steel brush set
Parts:
[ Ссылка ] Brake clean
Torque specs:
10 ft. lbs - Wiper arms
6 ft. lbs - Wiper motor mount bolts
9 ft. lbs - Cowl sub assembly bolts
6 ft. lbs - Air box bolts
15 ft. lbs - EGR mounting nuts and bolts
7 ft. lbs - EGR E8 torx stud bolts
7 ft. lbs - EGR pipe bolts
Hand tight
like and share this video!
If you have any questions or concerns, feel free to leave comments on our FB page.
Like us on Facebook
[ Ссылка ]
and SUBSCRIBE!
[ Ссылка ]
