for data recovery call: 855.366.4232
or request your service here: [ Ссылка ]
Both flash drives were sent in by the same client. Flash drive that needed to be recovered had a broken connector with ripped out pads. Donor flash drive that was supplied, to our surprise, was not working either. Both flash drives showed that so work attempts were made. At first, we wanted to swap NAND and controller over to the donor printed circuit board, and swap donor components to the patient PCB (+repair the connector), but the donor turned out to have a completely dead controller chip that would not even drop into the safe mode when NAND from the donor is removed. We managed to recover clients' data by swapping critical components over to the donor PCB.
if you want to ship your failed device to us for data recovery and free evaluation, simply fill out this form: [ Ссылка ]
and send your drive boxed with bubble wrap to this address:
HDD Recovery Services
391 Bank St, Suite 201
Ottawa, ON
K2P 1Y3
Canada
Updated 2019 my gear for soldering:
Green inspection light [ Ссылка ]
Platter extractor: [ Ссылка ]
Momentary foot pedal switch [ Ссылка ]
Vacuum pump [ Ссылка ]
Programmer [ Ссылка ]
Quick pogo pin adapter for eepROM [ Ссылка ]
Microscope: [ Ссылка ]
Multimeter: [ Ссылка ]
Microscope camera 21mp 60fps 1080P: [ Ссылка ]
JBC precision soldering iron and tweezers: [ Ссылка ]
Hot air station: [ Ссылка ]
Infrared preheater: [ Ссылка ]
BEST Flux: [ Ссылка ]
Wick: [ Ссылка ]
Solder: [ Ссылка ]
Solder paste for BGA reballing: [ Ссылка ]
NAND BGA rebelling stencil [ Ссылка ]
Gloves: [ Ссылка ]
Fume Extractor (mine is no longer available but this is the new version of the same unit) : [ Ссылка ]
Gear for filming:
small camera: [ Ссылка ]
big camera: [ Ссылка ]
Lens on big camera:[ Ссылка ]
this video: [ Ссылка ]
