Click for more info and reviews of this Redline Trailer Suspension Parts:
[ Ссылка ]
Check out some similar Trailer Suspension Parts options:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]
Full transcript: [ Ссылка ]
Today we're gonna take a look at the Front or Center or Rear Hanger for Double-Eye Springs. It's 3 5/8 inches tall and has a 9/16 diameter bolt hole. This hanger can be configured to work in the front, the rear or the center position to suspend your double-eyed leaf springer equalizer. It provides the attachment point for the leaf springs, and this hanger will suspend your springer equalizer from the trailer frame. It is designed to fit 1 3/4 inch wide double-eye springs with 9/16 diameter eyes. It is designed to work with a 9/16 diameter bolt that we do sell separately on our website, and it's usually listed on this product page as a related project. Now to just give you a few dimensions on this. We're going to measure the overall dimension, so from the very bottom up to the very top.
It's going to be right at 4 1/4 inches tall. The width on it, from side to side, is going to be right at 2 3/8 inches wide, and the total depth is going to be right at 3 inches. When they do size the hangers, they call this one a 3 5/8 inch tall, and basically what they're measuring is from the center of this hole up to the top. If we go center, it's going to be right at 3 5/8 inches tall. Then the inside width on this is going to be right at 1 7/8 inches. That should do it for the review on the Front or Center or Rear Hanger for Double-Eye Spring, 3 5/8 inches tall and with a 9/16 diameter bolt hole..
