Paksat 38.0° satellite settings updates | Paksat-1R all channel ok 4 feet | Luqman Dishtv
#satellitetv #paksat1r #satellite #luqmandishtv #satellitedish #channel

پاک سیٹ 1 آر پاکستان سیٹلائٹ پاکستان ٹیلی کمیونیکیشن سیٹلائٹ ٹی وی پاک سیٹ 1 آر کی معلومات پاکستان کی سیٹلائٹ پاک سیٹ 1 آر چینلز پاکستانی سیٹلائٹ کمیونیکیشن
PakSat 1R PakSat 1R Satellite PakSat 1R Channels PakSat 1R Frequency PakSat 1R Updates PakSat 1R Coverageb PakSat 1R Transmission PakSat 1R Signal PakSat 1R Configuration PakSat 1R Reception

paksat 1r ki peemaysh kya honi chahey our compete settings Kesay kartay hain
[ Ссылка ]-

Paksat 1r strong frequency 4001 v 13333


To set up PakSat 1R with a 4-foot dish antenna in Pakistan, follow these steps for optimal signal reception:

1. **Dish Alignment**:
- **Azimuth**: Aim the dish towards the correct direction. For PakSat 1R, the general direction is approximately 104.5° East. Use a compass or a satellite dish alignment tool for precise direction.
- **Elevation**: Set the dish elevation angle to approximately 30° to 35°. This may vary slightly depending on your specific location in Pakistan.

2. **LNB Configuration**:
- **LNB Frequency**: Use a Universal LNB with a frequency range of 10.7 - 12.75 GHz.
- **LNB Skew**: Adjust the LNB skew angle to match your local coordinates for optimal signal strength. Typically, this can range between -10° to 10°, but precise adjustment may be necessary.

3. **Receiver Settings**:
- **Transponder Frequency**: Use the following frequencies to scan for channels:
- Example frequencies: 3700 MHz (Horizontal) or 4100 MHz (Vertical).
- **Symbol Rate**: Set the symbol rate as required by the transponder you are tuning into, commonly around 30000 ksps.
- **FEC (Forward Error Correction)**: Usually set to 3/4 or auto.

4. **Fine-Tuning**:
- Perform a signal scan using your satellite receiver. Adjust dish alignment and LNB skew for maximum signal strength and quality.
- Check the signal quality on your receiver and make minor adjustments to the dish alignment to improve signal reception if necessary.

5. **Testing**:
- Once configured, test the setup by checking if you receive the desired channels and if the signal quality is consistent.

Always consult the latest satellite setup guides and local resources for any updates specific to your area.

paksat mm1 new update
paksat dish setting in pakistan
paksat mm1
paksat new update
paksat new update today
paksat dish setting
paksat ku band 2 feet dish
paksat and yahsat on one dish
paksat strong tp 2024
paksat Inb setting

свернуть