A Little Wisdom Helps You Become Smarter !
The following is a method for installing a simple excavator device on a tractor :
Firstly, prepare the required materials and tools, including metal components with sufficient strength for making the excavating arm, a bucket of an appropriate size, hydraulic system components (such as hydraulic cylinders, hydraulic pumps, oil pipes, etc.), as well as control levers and joysticks !
For the production of the excavating arm, sturdy steel can be selected. The length and shape of the arm are determined according to the size of the rear hopper of the tractor and the actual requirements. One end of the excavating arm is firmly fixed to the frame of the tractor's rear hopper by welding or bolt connection to ensure that it can withstand the forces during excavation !
When installing the bucket, make sure that the connection with the excavating arm is firm and flexible. Pin - type connections or other methods can be used so that the bucket can perform the excavation operation !
The installation of the hydraulic system is crucial. The hydraulic pump is installed at the power - take - off part of the tractor to obtain power through the transmission device. Hydraulic cylinders are respectively connected to the joints of the excavating arm and the bucket, and the extension of the excavating arm and the opening and closing of the bucket are controlled by the pressure of the hydraulic oil !
For the control part, the control levers and joysticks are installed at the rear of the tractor for the convenience of the operator. The pressure and flow of the hydraulic system are adjusted through the control levers to control the movements of the excavating arm and the bucket !
During operation, the operator sits on the tractor and controls the excavating arm and the bucket to perform the excavation operation by operating the control levers. The bucket is inserted into the soil, and then the bucket is closed by the control lever to dig up the soil. Then, the soil is poured into the tractor's hopper by controlling the extension of the excavating arm !
It should be noted that during the installation and use process, the safety and stability of the device must be ensured to avoid accidents. At the same time, the size of the excavating arm and the bucket should be reasonably selected according to the load - bearing capacity and power of the tractor to avoid affecting the performance and service life of the tractor !
