We developed the solid drivetrain mounts increase driver connection to the car by enhancing sound and response that's missing from this very quiet car.
You have the option upon install of raising the subframe to helps restore roll center geometry on lowered cars.
Follow the chapters below and the transcript as well as the factory service manual linked below the timeline.
Like & subscribe if you appreciate the time we took to show our work & would love to see what's next!
0:00 Drive Unit 4DU Solid bushing QC check
0:13 Motor & Gearbox Solid bushing install
2:15 Subframe Solid bushing QC check
2:21 Subframe Solid bushing installation
3:30 Results & raised SubFrame explained
4:13 OEM and raised SF spacer positions
4:34 Join the Drive unit & subframe.
5:01 Prepare to align subframe & chassis.
5:37 Inverter outlet to oil cooler inlet hose.
5:49 Rear subframe "stiffener" brace.
6:02 High Voltage harness to inverter.
6:23 All suspension links (OEM) installed.
- Upper traction rod "upper fore link".
- Toe rod "rear toe link".
- Upper control arm "UPPER AFT LINK".
- Lower traction rod"LOWER FORE LINK"
- Rear lower control arm"LOWER AFT".
- Axle
- Rear knuckle
7:47 Results & Stainless Washers
7:55 Chassis joined to complete rear end.
10:46 But first, we cut M6 studs in half.
11:29 Rear end joined to chassis again.
12:55 Shear Plate bracket, installed
13:11 Oil cooler hose to return hose
13:25 Inverter inlet hose (clip and plug).
13:44 Drive Unit HV cable battery (watch out)!
14:12 Secure battery coolant return tube.
14:26 Install skid plate.
14:44 Rear Damper Assembly.
15:09 Sway Bar, A.R.B. "Stabilizer Bar".
15:19 Oil refill process.
After the conclusion of this video, you should also do steps 60 - 84 as follows from the FSM:
[ Ссылка ]
Lower the vehicle
Install the rear fascia.
Fully install the rear aero shield.
Install the LH and RH rear suspension covers.
Install both rear wheels.
Install the 2nd row lower seat cushion.
Perform a cooling system vacuum refill.
Connect the LV battery power.
Unlock the vehicle gateway.
On the touchscreen, tap the Service Mode "wrench" (at the bottom of the touchscreen UI), and then tap Thermal, Refrigerant System, Stop Thermal Fill Drain, and then allow the routine to complete.
Hold the brake pedal, select park on UI to disable the EPB service mode.
On the touchscreen, tap the Service Mode "wrench" (at the bottom of the touchscreen UI), and then tap Thermal, Coolant System, Coolant Purge Start, click Run, and allow the routine to complete.
Perform the vacuum fill.
Note
Ensure that the coolant level is at the "Max" line.
On the touchscreen, tap the Service Mode "wrench" (at the bottom of the touchscreen UI), and then tap Thermal, Actions, then click the START button next to Test Thermal Performance, click Run, and allow the routine to complete.
Select the START button next to Test HVAC Performance, click Run, and then allow the routine to complete.
Install the cabin intake duct.
Install the rear underhood apron.
Close the hood and the trunk lid.
Move both front seats to original position.
Disable Service Mode.
Raise all windows and close all doors.
Remove the lift arms from below the vehicle.
Review wheel alignment requirements and add correction code as needed.
Parts Shop MAX is an Original drift suspension +steering parts 17yrs strong!
Headquartered at
Parts Shop MAX USA inc.
220 Engel Street
Escondido CA 92029
store.partsshopmax.com
Stocked globally.
World dealer instagram accounts are at:
@partsshopmax
@partsshopmaxjapan
@partsshopmaxnz
@partsshopmaxtw
@partsshopmaxeu
@FlowStateAutomation
ABS wide body kits made in USA w/ the latest 3D scanning & CAD modeling tech. CNC molds, thermoforming & 5axis CNC edge trimming, all done in house at
www.partsshopmax.com
#partsshopmax #poweredbyMAX #tesla #tesla3 #teslamotors #teslaM3 #teslaM3p #teslaM3performance #model3 #model3ownersclub #model3mods #model3longrange #model3wrap #teslafan #teslamotorsclub #model3mods #model3tuning #teslamodel #model3owners #2024model3 #model3highland #model3performance #model32024 #teslalife #teslaowner #teslacars #2024model3performance #TM3p #drifting #electriccar #evDrift #drift #aftermarket #upgrading
