Discover the latest advancements in humidifier technology with our comparison of the AC Infinity CLOUDFORGE GEN 2 versus GEN 1 T3 models. Join us as we unpack and delve into the innovative features incorporated into AC Infinity's revamped flagship humidifier. From enhanced design elements to improved performance metrics, we provide a comprehensive breakdown of what sets the GEN 2 apart. Additionally, learn a simple yet effective technique to revive non-functioning T3 or T7 humidifiers, ensuring prolonged utility and value for your investment. Sit back, enjoy the exploration, and don't hesitate to share your feedback in the comments section. We're also open to your suggestions for future video topics – your input shapes our content!



Feel free to reach out anytime were located in Green Bay WI. You can call or text us at (920)-857-9493


If you're interested in picking up any AC Infinity products at www.gardensupplyguys.com here are some links below ⤵️


If the Buy Button appears we have it in stock and ready to ship 🚚


If the Pre-Order Button appears this product is not ready to ship yet, but coming very soon so reserve yours today 👍


🛒 Shop AC Infinity CLOUDFORGE T3:


[ Ссылка ]


🛒 Shop AC Infinity CLOUDFORGE T7:


[ Ссылка ]


🛒 Shop entire AC Infinity Collection:


[ Ссылка ]


Todd's Maintenance Breakdown Email:


"So i went full macgyver last night, disassembled the entire T7 down the 'boards'.
Very simple, not a single 'trick' i just went slow and it all seems to have worked now that I've returned it to the tent (also installed a new usb uis cable) adding full 69Pro functionality.


-emptied lower tank of t7 after a full vinegar bath (2cups, 20min soak/rinse)
-removed single visible screw, long screwdriver needed on bottom of the unit
-removed 4screws/wheel and beneath each wheel is an additional screw like the first long one, remove these (5 total longer than the wheel caster screws)
-removed the exhaust intake 'door' by gently depressing the sides until free. the entire lower portion is easily detached and cleaned with vinegar and soap/water.


at this point i could remove the board that interfaces with the additional boards, by taking two screws off, disconnecting the two serial cables which correspond with the USBc and rh/temp sensor ports and then sliding out towards the center of the unit. i applied liberal amount of de-oxit, using a heavy-duty paper towel and small electronic plunger to get the papertowel fully inside the usbc port. used toothpick to dislodge any corrosion or buildup from the original spill-over.


final inspection with a microscope and a small can of compressed air + ISO qtips to futher clean the port. i did not apply any ISO directly to any parts, for fear of breaking down any plastic/rubber parts.
all is working well, thanks again for the nudge to tackle it fully.


IMO, you are probably positioned to take on this repair work for ACI and save them a lot of headache, if you have the capacity within your staff to address these faulty units. I know I woulda paid you ~$40 to bring the unit(s) back to life, assuming I could get the lower portion to you economically. just planting that seed, it does not take any technical knowhow other than proper steps and future disregard to warranty claims i guess."


@acinfinity


#gardening #gardensupplies #hydroponics #indoorgardening #newproducts #enviorment #humiditycontrol #comparison #humidifiers #growrooms #enviormentalcontrol #greenhousefarming #indoorplants #growingmushrooms #mushroom #mushrooms

свернуть