@radal05
timer relay 24vdc relay timer omron timer relay delay timer delay relay 220v cara kerja timer relay timer relay adalah Relay Timer Delay Modul Display 4 Tombol Digital DC Time Module Switch
Jual Timer Relay Terbaik
Link pembelian :
Cek YYC-2S Modul Relay Timer Delay Timer DC 5V 12V 5A Adjustable dengan harga Rp25.000. Dapatkan di Shopee sekarang!
[ Ссылка ]
Cek Relay Timer Display 4Tombol DC 6V~30V Delay Time Module Switch Control dengan harga Rp19.450. Dapatkan di Shopee sekarang!
[ Ссылка ]
1.Coba cek ini di Tokopedia,
[ Ссылка ]
2. Cek Relay Timer Delay Modul Display 4Tombol Digital DC Time Module Switch Control Circuit Trigger Saklar
[ Ссылка ]
Wide voltage power supply (5~30V), support MICRO USB 5.0V power supply
There is a key emergency stop function (STOP key), with reverse connection protection, reverse connection does not burn
Added sleep mode, after enabling, without any operation within 5 minutes, automatically turn off the display; any key to wake up
You can set different OP, CL, LOP parameters, these parameters are independent of each other and saved separately
All set parameters are automatically saved after power-off
Trigger signal source: high-level trigger (3.0V-24V) The signal ground and the system ground are not in the same ground to improve the anti-interference ability of the system (you can also short-circuit the common ground by yourself)
Output capacity: can control equipment within DC 30V 5A or AC 220V 5A
Quiescent current: 20MA
Working current: 50MA
Service life: more than 100,000 times; working temperature: -40-85C; size: 6.2*3.8*1.7CM
With optocoupler isolation, enhanced anti-interference ability, industrial-grade circuit board, set parameters will always be remembered after power failure
Special attention: MOS tube output is a passive contact, uncharged output, which controls the on-off function of a line
OP on time, CL off time, LOP cycle times (1-999 times, "---" represents infinite cycles)
Relay Timer Delay Modul Display 4 Tombol Digital DC Time Module Switch
Timer Display DC 6V~30V Delay Time Module Switch Control Dpt digunakan dgn PIR sensor, atau kipas, atau mesin penentas telur ayam, dll Spesifikasi:
• Voltage: 6V~30V rentang volt yang lebar (support micro USB 5.0V)
• Level Tegangan Trigger Input : 3.0V~24V , Signal ground an system ground tidak sama, bertujuan supaya tidak ada interferensi.
• Pemakaian arus standby: 20mA , Relay On: 50mA • Delay Timing 0.1 detik ~ 999 minutes (dapat di setting)
• Size: 6.2*3.8*1.7cm / 2.44*1.49*0.67" Cara Setting: Tekan Set selama 4 detik, untuk setting dan simpan, up dan down untuk mengubah nilai.
.• P1: Setelah sinyal trigger , relay ON selama OP time , dan kemudian Relay Off OP time
• P1.1: abaikan jika sinyal trigger terpicu lagi
• P1.2: jika ada triger lagi reset ulang timer , tp kl di trigger tetap HIGH counter tetap jalan
• P1.3: jika ada trigger relay langsung OFF, stop timer
• P-2: jika ada trigger, setelah OP time relay ON, dan OFF setelah CL time, re-trigger tidak berfungsi pd mode ini. •
• P3.1:Loop , jika ada trigger Relay ON selama OP time dan OFF setelah CL time, dan akan di ulang selama LOP time.(mis: jika OP = 7, CL=3, LOP=2 , jika ada trigger relay on selama 7 detik, dan OFF selama 3 detik, kemudian diulang sampe 2x), jika ada trigger akan counter akan di ulang
• P3.2: Loop sama dengan P3.1, beda nya hanya trigger pd saat power on counter langsung mulai, trigger tidak efek
Specification:
Working Voltage: 6-30V Supports Micro USB 5.0V Power Supply
Trigger Signal Source: High-level Trigger (3.0V-24V) signal is not in common with the system to improve the anti-jamming ability of the system (also can be connected to the ground by itself)
Output capability: can control equipment within 30 V 5A DC or 220 V 5A AC
Static Current: 20mA
Working current: 50mA
Service life: more than 100,000 times
Working temperature: - 40 - 85℃
Size: 62*38*17mm/2.44*1.49*
00:00 Radal 05
00:12 Relay Timer Delay Modul Display 4Tombol
00:40 Cara pasang
03:05 Cara setting
