Buy Now!
New Crankshaft Position Sensor from 1AAuto.com [ Ссылка ]

The crankshaft position sensor is an important component of any electronically controlled ignition system. The sensor provides the computer with data about the position of the crank shaft to properly adjust ignition timing. If the sensor in your vehicle is broken or malfunctioning, you may suffer poor performance, or get a check engine light. This video shows you how to install a new crankshaft position sensor on your 2000-2006 Chevy Tahoe.

• Check here for more videos on the 2000-06 Chevy Tahoe [ Ссылка ]

This repair was done on a 2005 Chevrolet Tahoe Z71 5.3L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2000 Chevrolet Tahoe
2001 Chevrolet Tahoe
2002 Chevrolet Tahoe
2003 Chevrolet Tahoe
2004 Chevrolet Tahoe
2005 Chevrolet Tahoe
2006 Chevrolet Tahoe

Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Pry Bar [ Ссылка ]
• 13mm Wrench [ Ссылка ]
• 8mm Wrench [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 13mm Socket [ Ссылка ]
• Socket Driver
• Socket Extensions [ Ссылка ]
• Swivel
• Torque Wrench [ Ссылка ]
• Dielectric Grease
• Paper Towels [ Ссылка ]
• Scan Tool

Subscribe: [ Ссылка ]

Check out our playlist:
Chevy Tahoe 2000-06 2nd Generation: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть