This lightweight 2-part marine epoxy fairing compound is perfect for reshaping, filling, and fairing. With an improved formula for less sagging and easier sanding, TotalFair fairing putty is ideal for boat building and repairs above and below the waterline on fiberglass, wood, aluminum, and steel. TotalFair dries fast and sands smooth. Color coded components for easy 1:1 mix ratio.

Easy to mix – green means it’s ready to go

With an improved formula for mixing, application, and sanding, TotalFair is the ideal solution for marine repairs, recreational vehicle improvements, fabrication, and woodworking. Ever had epoxy or fairing compound sag or go on like soggy sawdust because it wasn't mixed completely? That won’t happen with TotalFair because it's easy to see exactly when it's ready to use with color-coded components. The epoxy resin is yellow, and the hardener is blue (with some green expected from oxidation). Wearing protective gloves, mix the two parts together at a 1:1 ratio. Mix, fold, smear, scrape, repeat. Stop when you get a uniform, green-colored paste. That’s it. No complicated measuring or guessing. Just green. Once it's green and swirl-free, you’re ready to shape, fill, and fair dents, chips, gouges, cracks, and other unsightly things standing in the way of a gloriously smooth, ready-to-prime surface.

This fairing putty stays put

TotalFair is light and easy to work with to repair boats, kayaks, RVs, and trailers. The advanced, non-sagging formula formula spreads and hangs, staying where you put it. Even overhead, upside down, and sideways. Just pull or feather to a fine edge and a smoother surface.

Creates a smooth, hard, flexible finish

The TotalFair finish is smooth, even, and pinhole-free for strong, long-lasting bonds above or below the waterline. Make it even smoother by sanding after it cures. Which is quick – just 3 hours at 90°F. TotalFair has a high tolerance for flexing, especially on the hull. It adheres aggressively, distributes stress evenly, and it won’t crack or break free. To suit repairs ranging from a few minor cracks to a slew of imperfections, our marine fairing compound comes in pint, quart and gallon sizes.

TotalFair Details

• Lightweight, 2-part marine epoxy fairing compound
• New formula features thicker consistency for better control while scooping, mixing, and spreading
• Use above and below the waterline for reshaping, filling, fairing, and repairing.
• Works on horizontal, vertical, inclined, and overhead surfaces without sagging.
• No-mess, easy-mix, color-coded formula dries fast. Easy to sand once cured.
• Apply fairing compound to fiberglass, wood, steel, and aluminum.
• Sizes: Available in two-part Pint, Quart, and Gallon Kits. Each kit contains Resin Part A (yellow) and Hardener Part B (blue).
• 2-Pint kit includes one pint Part A & one pint Part B. 2-Quart kit includes one quart Part A & one quart Part B. Gallon kit includes half-gallon Part A & half-gallon Part B.
IMPORTANT: TotalBoat Gelcoat should not be applied directly over TotalFair or the gelcoat will not cure properly. Instead, use TotalProtect over TotalFair, before applying Gelcoat.

Important Application Notes

• Some oxidation of the blue hardener is expected and does not impact the mixing or application of TotalFair. If hardener arrives with a light green oxidized tint, simply mix with the resin to achieve proper color and consistency.
• Gelcoat should not be applied directly over TotalFair or the gelcoat will not cure properly. Instead, apply TotalBoat TotalProtect Epoxy Barrier Coat Primer over TotalFair, and allow to cure fully before applying Gelcoat. Primers are sold separately.
• When filling holes or gouges: Filling holes up to 3/4" thick may need a second pass, once cured. When fairing a large gouge (maximum depth fill), a 6:1 width to depth ratio is recommended per application. For deep/narrow areas that exceed 6:1, just apply TotalFair in stages, building up each time.
• Do not apply TotalFair over 1-component previously painted surfaces. If you are not sure what the previous coating is, remove it before applying TotalFair.
• Storage below the recommended temperature range can cause crystallization of the resin and hardener. If TotalFair crystallizes, simply close the containers completely and set them in a sealed plastic bag, with no air. Place the sealed bag in a bowl of warm water (125-150°F) for a couple of hours. This action will undo the crystallization, and the product will be the proper consistency for use.
• In between uses, cover the remaining material in each container with plastic sheeting before securing the lids tightly. This helps extend the shelf life and minimize further oxidation.

Safety Precautions

• Wear protective gloves when mixing TotalFair.
• Wear a proper respirator when sanding.

TotalBoat: [ Ссылка ]
TotalBoat TotalFair Epoxy Fairing Compound: [ Ссылка ]

свернуть