Here we have the new EDU2AE/TOP Multiple Torque Controller with Expand software package from Kolver. This torque control unit works with all current controlled PLUTO screwdrivers in a torque range of 2.6 to 442 in/lbs depending on the driver used.
The large screen and easy to use touchpad offers access to up to 8 independent P-sets which are manually programmable. Each P-set can be adjusted on the unit itself, or remotely with a PC and uploaded via USB drive or over a network connection. Parameters within each program include torque, speed, joint type, number of screws, number of rejects allowed, min and max screw time, ramp, auto-reverse, program sequence, soft stop and more.
One way to program the EDU controller from a PC is using the included Kolver USB drive and Expand software. After launching the EDU EXPAND software users will be able to select their tool model from the drop down list and change the program parameters, password protection, and sequence parameters. After configuring the P-sets they can be saved as a numbered file onto the USB drive.
To upload the program to the controller insert the USB drive into the port on the front of the unit. Once the desired program is selected it will load the parameters onto the controller. Each of the individual P-sets programmed on the Expand software are now available for use on the controller. With this process an infinite number of programs can be created and stored for future production needs. P-sets which are modified on the controller can also be saved back onto the USB for later use.
After loading a program and running it with the USB attached the controller will save the results to the USB in the form of a plaintext file. This file contains timestamped results from each fastening and can be used to trace results.
An alternate way of sending program data to the EDU controller is to use Kolver’s Ethernet Assist device. The device is connected to the controller with a serial cable and then to the network with an ethernet cable. This will allow any networked computer running the Expand Software to receive screwing operation reports and remotely program the controller without needing a USB drive or physical interaction with the controller.
Get the most out of your PLUTO screwdrivers with a new EDU2AE Expand controller today at [ Ссылка ]
Products used in this video:
- PLUTO10P/N Pistol Grip Screwdriver
- EDU2AE/TOP/E/120V Controller
