Learn how to diagnose and repair your MAXXFAN RV exhaust fan using this step-by-step DIY instructional video!


☆PARTS & EQUIPMENT SHOWN IN VIDEO:
Control Panel & Button Board: [ Ссылка ]
Conformal Coating Spray: [ Ссылка ]
Maxxfan Pro: [ Ссылка ]
Maxxfan Deluxe: [ Ссылка ]
DeWALT Drill Set: [ Ссылка ]
Electrical Tape: [ Ссылка ]
Digital Multimeter: [ Ссылка ]


☆PATREON SPECIAL ACCESS:
[ Ссылка ]


☆FATE UNBOUND RECEIVES A SMALL COMMISSION WHEN YOU SHOP THROUGH THIS AMAZON LINK:
[ Ссылка ]


☆SOCIAL MEDIA:
Instagram: [ Ссылка ]
Facebook: [ Ссылка ]
Check out the rest of our videos: [ Ссылка ]


☆CHAPTERS:
0:00 Introduction
1:18 Remove the fuse
2:16 Remove covers and screws from vent fan
4:25 Unplug fan motor
4:59 Expose the power wires
5:45 Test if there's power to the wires
7:48 How to test if the motor is working
9:18 Unwire old control board from power wires
10:08 Remove old control board from mounting & clean it
13:34 Prep the new control board with sealing spray
16:06 Remove old button pad
17:56 Install new button pad
19:13 Mount new control board
21:04 Wire new control board into power wires
23:15 Plug in fan motor
23:32 Test if it works
25:16 Wrap wire nuts in electrical tape like a pro
26:32 Conclusion

#MaxxFan #RVDIY #Repair


☆SPECIAL THANKS to our Patrons who have pledged $5+ at [ Ссылка ] to help make this video possible!
⭐ Allan & Karen K.
⭐ Allen H.
⭐ Andy U.
⭐ Bill & Cathy O.
⭐ Bridgette & Ryon
⭐ Bryan A.
⭐ Caroley
⭐ Chris & Doreen W.
⭐ Clay A.
⭐ Colette K.
⭐ Crystal C.
⭐ Curt E.
⭐ Dan P.
⭐ David C.
⭐ David D.
⭐ David E.
⭐ David R.
⭐ Donald W.
⭐ Doug S.
⭐ Eddie O.
⭐ Franklin G.
⭐ Gary & Diane H.
⭐ Greg L.
⭐ iLovecleanlaundry
⭐ Jamie W.
⭐ Jason C.
⭐ Jeb & Barb B.
⭐ Joe & Cheryl P.
⭐ John C.
⭐ John L.
⭐ John T. L.
⭐ Kari S.
⭐ Kathie S.
⭐ Kathleen M.
⭐ Ken & Hariven C.
⭐ Kyle O.
⭐ Kyle R.
⭐ Larry M.
⭐ Larry O.
⭐ Laura C.
⭐ Lisa H.
⭐ Lucinda M.
⭐ Mark & Melinda A.
⭐ Matt & Lisa M.
⭐ Matthew H.
⭐ Nancy D.
⭐ Rachel & Clarence B.
⭐ Robert C.
⭐ Ron & Susan H.
⭐ Ron B.
⭐ Sam Z.
⭐ Schylar B.
⭐ Scott @ Go Small. Live Large!
⭐ Scott & Charlotte R.
⭐ Stephen C.
⭐ Susan R.
⭐ Sybil C.
⭐ The Bracioles
⭐ Thomas E.
⭐ Troy P.
⭐ Vern & Kathy J.


After only four years of ownership, our MAXXFAN has completely stopped working. Pressing the power button does absolutely nothing and the fan doesn't even try to rotate. So, of course, this became a DIY repair job I just had to tackle myself.

Just like most DIY jobs on RV appliances, diagnosing and repairing a MAXXAIR exhaust fan is a very straightforward and easy project. Most handymen with simple tools on hand can complete this project in a couple hours.

It turns out our MAXXFAN failed because of excess moisture buildup on the control board causing terminals to corrode completely away. This is extremely frustrating considering most exhaust fans like this are installed directly over the shower like ours is. However, I came up with a solution to this problem that results in my new control board being water resistant to avoid this issue in the future!

Check out the video below for a full step-by-step guide on how to diagnose a non-working MAXXFAN RV exhaust fan, as well as how to apply a safe and non-conducting water resistant coating to the new control board!


*Affiliate Disclaimer: As an Amazon Associate I earn from qualifying purchases.

свернуть