Buy Now!
New CV Axle Assembly Set from 1AAuto.com [ Ссылка ]
New CV Axle Assembly from 1AAuto.com [ Ссылка ]
This video shows you how to install a front CV axle on your 1996-2002 Toyota 4Runner. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This repair was done on a 2001 Toyota 4Runner SR5 3.4L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
1996 Toyota 4Runner
1997 Toyota 4Runner
1998 Toyota 4Runner
1999 Toyota 4Runner
2000 Toyota 4Runner
2001 Toyota 4Runner
2002 Toyota 4Runner
Tools you will need:
• Pry Bar [ Ссылка ]
• 14mm Socket [ Ссылка ]
• 21mm Socket
• 36mm Socket [ Ссылка ]
• Straight Cutters
• 1/2 Inch Impact Gun [ Ссылка ]
• 3/8 Inch Impact Gun
• Torque Wrench [ Ссылка ]
• Anti-Seize Grease
• Gloves [ Ссылка ]
• Safety Glasses
• Drain Pan
• Floor Jack [ Ссылка ]
• Rubber Mallet
• Wheel Chocks
Subscribe: [ Ссылка ]
Check out our playlist:
Toyota 4Runner 3rd Generation 1996-2002: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
