One of the things I love most about the Berkey is that you can test the filters to ensure they're still working properly.

CHECK IT OUT ON THE BLOG HERE: [ Ссылка ]

PIN IT TO YOUR FAVORITE CLEAN LIVING BOARD: [ Ссылка ]

QUICK BERKEY LINKS:
BIG BERKEY: [ Ссылка ]
ROYAL BERKEY: [ Ссылка ]
SCRATCH AND DENT: [ Ссылка ]
BLACK FILITERS: [ Ссылка ]
FLUORIDE FILTERS: [ Ссылка ]
BERKEY FILTRATION SPECIFICATIONS: [ Ссылка ]
STAINLESS STEEL SPIGOT: [ Ссылка ]
IMPERIAL BERKEY: [ Ссылка ]
SHOWER FILTER: [ Ссылка ]

Sign up for my FREE essential oil masterclass: [ Ссылка ]

Let’s Connect!

INSTAGRAM: [ Ссылка ]
FACEBOOK:
[ Ссылка ]
PINTEREST:
[ Ссылка ]

WHY DO A RED FOOD DYE TEST?
The black Berkey purification elements are so strong that they can actually filter out artificial red food coloring from water! If you think your filters could have been damaged in any way from transporting or dropping them you can quickly and easily test to make sure they're still structurally sound and filtering efficiently.

Also, If you've had your filters a while and not sure if they need to be changed out or not, it's really easy to find out! Berkey actually recommends that you run the red dye test on your new berkey filters before first use to ensure everything is working as it should. It's a really neat and fun science experiment for the kids too!

And if you're still in research mode and learning all you can about Berkey water filters, be sure and check out my Berkey water filter review / pros & cons.

**Important: NEVER perform the red dye test with your Fluoride filters still attached. You can only do the dye test on the black filter elements.***

So let's get right to it! I'll be doing the red food dye test on my Big Berkey that has 2 black berkey filters and no fluoride filters.

WHAT YOU'LL NEED FOR THE TEST:
-the same number of clear jars/glasses as black filter elements you have installed. I have 2 filters so I used 2 quart jars. *This method is much better than using one large container because you can evaluate each filter individually for efficacy.*
-ARTIFICIAL red food coloring and a 1/2 teaspoon measuring spoon. It's very important that you use artificial food coloring and not natural.
-a pitcher or jar to mix the water and dye

STEPS TO PERFORMING THE BERKEY RED DYE TEST
1. Start by dumping all of the water out of your Berkey if it has any. You want it to be empty when you pour in your red water.
2. REMOVE FLUORIDE FILTERS IF USING.
3. Mix 1 teaspoon of red food coloring per gallon of water. I mixed up a 1/2 gallon so I used 1/2 teaspoon of dye.
4. Place your top chamber over the appropriate number of jars ensuring that each filter stem is in a jar. Make sure the chamber is steady on the jars and support it if necessary to keep it from falling.
5. Pour your red water into the top chamber and watch to see if it comes out clear or colored!
6. If red coloring passes through any of your filters, first ensure that they're installed correctly and not allowing water to seep through where the filter is attached with the washer and bolt.
7. Change any filters that didn't pass the test and resume drinking your healthy, clean water!

свернуть