Want to take a Tamiya TT-02 rallying? Welcome to this Part 2 of my Tamiya TT-02 Chassis Build Guide, where I focus on the changes needed to enable this versatile chassis to perform better when running off road or rallying. My TT02 will eventually be a Subaru Impreza '99 Richard Burns replica rally car. So in this video I will show the subtle little mods and tips I've learned from previous builds, and we focus mainly on the modifications to the suspension to enable better off-road running. Most are very simple, common sense and cost-effective (i.e. free or very cheap!) but when added together make a big difference to off road running and the long life of the RC car. I hope you find something of interest or helpful in the video. As always, thanks for watching and all the best from Mark.. :)

Here is a link to the supplier I use on eBay for the stainless hex screws. [ Ссылка ]
They are the cheapest I've found - about £3 for 50 M3x10mm button head screws! And a pack of 100 is only a few pence more. Free postage. They don't do packs for Tamiya kits, you just have to buy M3 screws of different lengths to match the length of the ones in the kit. I buy packs of 8mm, 10mm, 12mm and 15mm screws and just use the Tamiya ones if any longer screws are needed.

свернуть