Metal cutter with angle grinder DIY. Great for welding and cutting with precision.

Start off by cutting a piece of wood that's 25cm by 40cm. Then cut off two pieces of supports that are 6cm by 4cm. I used a band saw to cut off the supports. Then cut a 6mm hole into both pieces that align with each other. Mark the place where the supports are going to be placed 6cm from the side of the base. Outline where the support will go then drill two holes in the base where screws are going to be placed. Then cut a 2cm by 7 cm piece and drill a 6mm hole into it. Then cut 6mm bolt with the angle grinder to be placed inside of the previous piece. The hot glue the bolt into the piece so a piece of the bolts sticks out on both sides. Use wood glue to glue the piece on a platform that's 7cm by 18cm. Drill holes into the middle of the platform and the base to attach eye hooks and the spring. Next, use clamps to secure the angle grinder. Drill the platform to attach the steel clamps with screws. Finally, you can attach the angle grinder to the platform by using the hose clamps. Adding a backing piece would be the final step and the chop saw is complete! Enjoy cutting all kinds of metal pipes and plates with this tool.


Homemade Tools: [ Ссылка ]
Facebook: [ Ссылка ]
Twitter: [ Ссылка ]
Reddit: [ Ссылка ]

Please Like, Comment, and Subscribe

-~-~~-~~~-~~-~-
Please watch: "Jigsaw Circle Cutting Jig- Cut Perfect Circles"
[ Ссылка ]
-~-~~-~~~-~~-~-

свернуть