How To Change Oppo Reno6 Pro 5G Display Change With All Process…..🙏🏻🙏🏻


#viralvideo #smartphone #displayrepair #androidtablet #5g #5gmobile #5gmobiledisplaychange #displayrepair #displayreplacement #oppo #opporeno6pro5g #usa #india #world #canada #asia #australia #korea #japan #southafrica #southkorea #bangladesh

The process of replacing the display on an Oppo Reno6 Pro 5G requires careful disassembly and should ideally be performed by a professional. However, if you wish to do it yourself, here’s a general guide to the steps involved. Please keep in mind that working with smartphone components can be delicate.

Tools Required:

• Plastic pry tool
• Suction cup
• Tweezers
• screwdriver
• SIM ejector tool
• Heat gun (optional, for loosening adhesives)

Step-by-Step Process:

1. Power Off the Device:
• Ensure the phone is powered off completely before starting the process.
2. Eject SIM Tray:
• Use the SIM ejector tool to remove the SIM card tray from the phone.
3. Heat the Edges of the Back Cover (Optional but Recommended):
• Use a heat gun or hair dryer to gently warm the edges of the back cover. This will soften the adhesive and make it easier to remove.
4. Remove the Back Cover:
• Using a suction cup, create a gap between the back cover and the frame. Insert a plastic pry tool into the gap and gently work around the edges to lift the back cover. Take care not to damage the cables inside.
5. Remove Screws:
• Once the back cover is off, locate and unscrew all the screws holding the internal shields in place. These screws typically cover the battery and the motherboard.
6. Disconnect Battery:
• Before proceeding, disconnect the battery connector from the motherboard. This prevents any accidental short circuits.
7. Disconnect Display Cable:
• Disconnect the display cable that connects the screen to the motherboard. You may need to remove a few more shields or screws to access the connectors.
8. Remove the Old Display:
• If the display is cracked or broken, carefully heat the edges of the screen with a heat gun. This will soften the adhesive. Use a suction cup and pry tool to slowly detach the display from the phone’s frame.
9. Clean the Frame:
• Remove any leftover adhesive from the frame using isopropyl alcohol and a cloth or tweezers.
10. Install the New Display:
• Apply fresh adhesive strips or use a small amount of glue on the frame’s edges. Place the new display into the frame, ensuring it aligns perfectly.
11. Reconnect the Display Cable:
• Reconnect the display cable to the motherboard.
12. Reconnect the Battery:
• Reconnect the battery and ensure all connectors are secure.
13. Reassemble the Phone:
• Replace the internal shields and screw them back into place. Once done, stick the back cover back on (apply new adhesive if necessary) and ensure it’s secured.
14. Power On the Device:
• Turn the device on and test the new display to make sure it’s functioning correctly.

👇🏻Here’s Some My Works Keep Supporting👇🏻

[ Ссылка ]

[ Ссылка ]


[ Ссылка ]

be/9NNwWYFYUHw?si=U59dofkK2tylXAs_

[ Ссылка ] ?sub_confirmation=1

[ Ссылка ] ?sub_confirmation=1

[ Ссылка ] ?sub_confirmation=1

[ Ссылка ] ?sub_confirmation=1

[ Ссылка ] ?sub_confirmation=1

[ Ссылка ] ?sub_confirmation=1

[ Ссылка ] ?sub_confirmation=1

[ Ссылка ] ?sub_confirmation=1

[ Ссылка ] ?sub_confirmation=1

[ Ссылка ]

[ Ссылка ] ?sub_confirmation=1

[ Ссылка ] ?sub_confirmation=1

[ Ссылка ] ?sub_confirmation=1

[ Ссылка ] ?sub_confirmation=1


[ Ссылка ] ?sub_confirmation=1


[ Ссылка ] ?sub_confirmation=1

[ Ссылка ]


   / @singhrepair  

@SinghRepair
@SinghRepair
@SinghRepair

#viralvideo #smartphone #real #music #windows #explorepage #explore #usa #india #uk #canada #world #mobilerepairing #mobilerepair #SinghRepair #samsungrepair #shortsvideo

свернуть