First to test out and see if the Raceland Classics from the 1st Gen 86/BRZ fit on the 2nd gen, and I am happy to report that they are direct bolt up!
$540 Shipped with Lifetime Warranty.
If you are interested in checking these Raceland Classics out, visit:
[ Ссылка ]
Looking forward to see how these perform and hold up after 1 year. Thank you for checking out the content
Features:
FRONTS. Adjustable top camber plates
Full coilover adjustment setup (Shocks and Springs)
Front Spring rates ~6k
Rear Spring rates ~7k
**NO ADJUSTABLE DAMPENING**
PRE-Installation Tips:
1) Make sure to set pre-load on each spring. I pre-loaded to 5mm (Thickness of spanner wrench)
2) Check all top hat nuts and make sure they are tight
3) Recommended to apply anti-seize on all coilover threads
Fitment Notes:
Direct bolt up Front and Rear. No issues
*NOTE. Front coilover/brake hose mount DOES NOT fit. The bracket is slightly smaller, will require modification if you want to make it fit to the bracket. I just used zip ties to secure the brake line hose for now
Ride Quality:
Much stiffer over OEM setup. Improved steering response, and reduced body roll
Hope you all are doing well! -Bo
0:00 - Unboxing
1:18 Pre-Installation Prep
1:45 Install Overview
3:24 Dashcam. Quick test Drive. Fronts only
3:40 Installed. Final Reveal reel
4:11 Why Racelands? First Impressions
4:45 Past suspension experiences
5:39 3 Main Reasons
6:00 Fitment details from Gen 1 kit on Gen 2 GR86/BRZ
6:20 Raceland rep. About Raceland
7:24 Initial Impressions so far
7:57 Stiffness rating OEM vs Racelands
8:20 Long term testing begins
8:32 Minor issue. Brake line bracket mount
8:55 Raceland Resources (Install/Adjust Height/Endlinks)
9:40 End
9:54 Test Drive after initial install
