([ Ссылка ]) Compact Double Height Shift for extra lift height.

On 01 September 2008, the company Bergschenhoek BV completed the construction of its new warehousing facilities at its Staphorst site. The facility covers some 2,500 m² (26,900 sq ft) and makes production and delivery at the Staphorst site more efficient, as well as serving as a central distribution centre for the other four sites.

"We pick up the finished products from the production line with one of our two Caterpillar reach trucks, model NR16N, and place them directly in their storage locations in the warehouse. This reach truck is fitted with a MSE-Forks CDHSS mast extension system. This system was mounted on our forklift truck fairly easily by our dealer and gave us an additional lifting height of 0.5 m. We needed to purchase this system because we have low overhead cranes in production areas, but goods need to be stored up high in the warehouse. There's also limited headroom between the production area and the warehouse. Standard forklift truck masts would be too tall to clear the portal cranes and make it from the production hall to the warehouse. Our Caterpillar dealer, Crepa, brought our attention to the MSE-Forks CDHSS mast extension system, and after close consultation, we decided to purchase the system. Therefore, we can now use a shorter mast in combination with the mast extension system to carry out operations in the production hall and warehouse without the need for any structural alterations. Moreover, the CDHSS frame doesn't obscure the driver's line of sight and only requires one extra hydraulic function." According to Marco van Enteren (forklift truck driver), "It's a perfect system... principally because it's easy to operate and doesn't adversely affect forklift truck manoeuvrability. In-built synchronization also means that the forks can be accurately raised and lowered in tandem, which is essential for safety." explains Henk Mulder (Staphorst Site Manager),

свернуть