Airstop Solo is an adhesive tape for airtight sealing membrane joints, and sheeting such as OSB, plywood, D W D Wood Fiber Panels, Masonry AND METAL. Airstop Solo is designed to be quick and easy to install. In the following video, you will see that it takes up to 50 per cent less time to install. Unlike the product on the right, Airstop Solo has no backing liner, yes, that's right! It comes straight off the roll onto the membrane or substrate you are sealing, in this case, straight onto the joints of the OSB sheeting. The SPECIAL PATENTED reinforced liner is slightly malleable and can be easily torn to length by hand. It's extremely quick and easy to use. Watch as the installer quickly gets through his work. The fact that it has no backing liner and requires no knife to cut makes it not only quicker to clean up AFTER USE but also extremely environmentally friendly. It is suited for large-scale jobs or for application within factory scenarios where speed and waste are critical factors. It comes in two useful widths, 60mm and 100mm, both on 50-meter rolls.
Use an Airstop Pak Pressure applicator to apply pressure when installing the tape. Airstop SOLO can be used both indoors and outdoors. Its generous amount of adhesive, slight flexibility, and eh Plus VOC rating make it an excellent tape to seal all joints and junctions. Watch how the installation on the left is quicker than the one on the right. For a busy person or a busy workshop, the cost saving in time alone is substantial, allowing one to get to the next job that much quicker. As they say, time is money, or as we say, time is precious It truly is 50% quicker. Put some value on your time and choose Airstop Solo. Like with all of Isocell's products, you can rest assured that the quality is second to none
