In this video, the second in a series on tool angles, Sam Angelo explains what the spindle gouge is used for, he covers angles for this tool and shows various cuts this tool can make at the lathe on a spindle turning. Sam finally ends up, sharpening 3 gouges each with a separate angle.

See chapter time stamps below. Click on the time listed and jump to the topic.

Discount!!!!
Mike Mahoney's Hollowing Kit
If you're interested in the Mike Mahoney Halloween kit and receiving a discount, check out the information below as well as my original video on the Halloween kit review.


MIKE MAHONEY Hollowing Kit discount...... use code SAM5 for a 5% discount: Use my code, SAM5 for 5% off any of the Signature Mahoney Hollowing tools! [ Ссылка ]... (Discount available until January 31st 2025)

My Video Review • Mike MaHoney Hollowing Kit Review w...
[ Ссылка ]

I am also a Robust Lathe dealer. If you're interested in the finest American made Lathe, please contact me at samandcheryle@gmail.com and I will answer any of your questions. I have an American Beauty ready to ship-don't wait for a foreign import. And the price will not increase because of a tariff.
Thanks, sam angelo

Chapter topics: click on the time and jump to the desired topic. These are also found in the video.
00:00 Introduction
00:35 The project explained
01:21 Spindle gauge angles
02:19 specific grinds on a spindle gouge
04:14 Specific nose angles
06:10 Fingernail grind
06:51 55° 40° 30° nose angles' chart
07:54 Spindle turning at the Lathe
08:40 Using three different Spindle gouges
10:12 Making a V cut
11:02 Making a cove cut
12:46 Sharpening Spindle gouges
13:31 How to set up a certain degree angle?
14:16 Vari grind jig
15:13 Sharpening continued
17:17 Conclusion, and thanks for watching

свернуть