Please like and subscribe to jtgravityRC for more videos! Thanks! Cheers!

Please support this channel by buying products from these sellers (if you need to buy any) using the links below. Thanks.

Summary
1. Install TBS AGENT X and update Xfire tx to 3.72:
[ Ссылка ]
2(a) Initiate the WIFI module by upgrade to 1.17 and connect to TBS Cloud
Download the firmware 1.17 from here:
[ Ссылка ] under the heading “Requirements” – the firmware-files for the wifi modul
OR: [ Ссылка ]
2(b) Type “192.168.4.1” and connect to built-in wifi on WIFI module e.g. “TBX_XF_AP_XXXXXXX” and "upgrade" and then connect to TBS Cloud under "WIFI" using your home wifi access point and password
3. Check crossfire tx radio and you will see the User ID
4.Check Wifi module on your radio and you will see “online”
5. Check the settings on the crossfire tx on all multi-bind radio and the Mode and the channel order on both radios are the same.
6. Enable multi-bind
7. Put your crossfire tx on “bind” before you power your quad (this is to avoid pressing the bind button on the receiver) and it will start the binding process and ask you to update your receiver without pressing the bind button on the receiver. If this does not work then press the bind button on the receiver and it will then bind to your crossfire tx.

Radiomaster TX16S + TBS crossfire module
[ Ссылка ]

DJI FPV Playlist: [ Ссылка ]

Banggood : [ Ссылка ]

Gearbest : [ Ссылка ]

Setting throttle limit and assign to a switch in Betaflight
[ Ссылка ]

Betaflight
Throttle limit setting
1. Go to "PID Tuning" tab
2. Choose the profile that you like e.g. Profile 1, Profile 2 or Profile 3 and then set the corresponding Rate Profile to Rate Profile 2.
3. Press "Save".
4. Go to "CLI" tab
5. Then type in the command line at the bottom: Set throttle_limit_type=scale
6. Then press "Enter"
7. Then type in: Set throttle_limit_percentage=50
8. Then press "Enter"
9. Then hit: "Save" Assign to switch
10. Go to "Adjustment" tab
11. Use the "SB" switch that is Aux 2
12. Enable first and second line and change to Aux 2 on both
13. Set first line range (flick switch to confirm" - put in down position and make sure the indicator is within the orange zone, then set rate profile selection on the same line to "Slot 1" via "Aux 2")
14. Set second line range (flick switch to confirm" - put in up position and make sure the indicator is within the orange zone (if not adjust it), then set rate profile selection on the same line to "Slot 2" via "Aux 2")
15. Then hit "Save"

Find more in Banggood AU warehouse: [ Ссылка ]

Banggood
[ Ссылка ]

Seeing clearly = Flying confidence

ImmersionRC Rapidfire Playlist [ Ссылка ]

Recommendations:
Digital
[ Ссылка ]
[ Ссылка ]

Protective case:
[ Ссылка ]

Diopter
[ Ссылка ]

Transtec Mini
[ Ссылка ]

Eachine Viswhoop
[ Ссылка ]

Skyzone Module Bay
[ Ссылка ]

Immersionrc Rapidfire
[ Ссылка ]

Module Bay cover
[ Ссылка ]

Furious FPV Stubby Antenna
[ Ссылка ]

SMA right angled adapter
[ Ссылка ]

Analog (if you still want Fatshark)
1. Fatshark HDO + ImmersionRC Rapidfire(plus furiousfpv antenna below or any good antenna)
2. Any compatible Fatshark + ImmersionRC Rapidfire (plus furiousfpv antenna below or any good antenna)
3. Any Fatshark + True D or Realacc Pro Plus Achilles (plus furiousfpv antenna below or any good antenna)

Featured:
FuriousFPV True D V3.8
[ Ссылка ]
[ Ссылка ] FuriousFPV True DX
[ Ссылка ]
[ Ссылка ]

FuriousFPV antenna
[ Ссылка ]
[ Ссылка ]
[ Ссылка ]

ImmersionRC Rapidfire
[ Ссылка ]
[ Ссылка ]

Gearbest - [ Ссылка ]

Realacc rx5808 pro plus OSD Achilles
[ Ссылка ]

Jumper JP4IN1 Multi Protocol Module
[ Ссылка ]

Eachine UZ65
[ Ссылка ]

In Australia: Nextfpv
[ Ссылка ]

Entry Level Pilot Series Playlist
[ Ссылка ]

How to choose Fatshark Style Goggles Playlist
[ Ссылка ]

Download Page for
Betaflight
[ Ссылка ]

Music from [ Ссылка ] (if any)

свернуть