Buy Now!
New Wheel Bearing & Hub Kit from 1AAuto.com [ Ссылка ]
New Wheel Bearing & Hub Kit from 1AAuto.com [ Ссылка ]

This video shows you how to install a front wheel bearing & hub on your 2003-2008 Toyota Corolla. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

This repair was done on a 2008 Toyota Corolla S 1.8L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla

Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Pry Bar [ Ссылка ]
• 19mm Wrench [ Ссылка ]
• 17mm Socket [ Ссылка ]
• 19mm Socket
• 21mm Socket
• 30mm 12-Point Socket [ Ссылка ]
• Press
• Pliers
• Snap Ring Pliers
• 1/2 Inch Impact Gun [ Ссылка ]
• 3/8 Inch Impact Gun
• Torque Wrench [ Ссылка ]
• Gloves [ Ссылка ]
• Safety Glasses
• Floor Jack [ Ссылка ]
• Hammer
• Wheel Chocks

Subscribe: [ Ссылка ]

Check out our playlist:
Toyota Corolla 9th Generation 2003-2008: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть