For more information visit [ Ссылка ]

Looking to perform a soundcheck using your BLX4R Wireless System? Watch our video here to find out how: [ Ссылка ]

0:00 - How to set best channel
0:10 - Preparation
Connect and turn on receiver
Keep the transmitter off

0:22 – Setting Up a Single Channel System
Press group to scan for best group and channel
Turn on the transmitter
Set it to the same group and channel
The single channel system is now ready to use

1:23 – Setting up a Multiple Channel System
Tip: BLX systems must be in the same frequency band for this procedure
Contact Shure for more information on band variations and frequency coordination
For a rack mounted multi-channel system, keep the original transmitter and receiver on
Every receiver must be set to the same group
Press and hold the group button on the next receiver until the display flashes
Then press group to select the same group as the first receiver
The receiver automatically performs a channel scan and selects the best available channel
Turn on the transmitter and set to the same group and channel as the receiver
Repeat for additional receivers

2:36 - Checklist
All receivers set to the same group
Receivers show RF signal

свернуть