Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com [ Ссылка ]

Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to install a new wheel hub and bearing on your 2007-14 Chevy Silverado.

• Check here for more videos on the 2007-2014 Chevy Silverado: [ Ссылка ]

This repair was done on a 2007 Chevrolet Silverado 1500 WT 4.8L and the process should be similar on the following vehicles:
2007 Chevrolet Silverado 1500
2008 Chevrolet Silverado 1500
2009 Chevrolet Silverado 1500
2010 Chevrolet Silverado 1500
2011 Chevrolet Silverado 1500
2012 Chevrolet Silverado 1500
2013 Chevrolet Silverado 1500

Tools you will need:
• Flat Blade Screwdriver [ Ссылка ]
• Pry Bar [ Ссылка ]
• 18mm Wrench
• 15mm Socket [ Ссылка ]
• 18mm Socket
• 21mm Socket
• 36mm Socket [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Needle nose pliers [ Ссылка ]
• Ratchet [ Ссылка ]
• Socket Driver
• Torque Wrench [ Ссылка ]
• Copper Anti-Seize
• sanding disc
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Wire Brush [ Ссылка ]

Subscribe: [ Ссылка ]

Check out our playlist:
Chevy Silverado 2nd Generation 2007-2014: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть