Buy Now!
New Control Arm Bushing Set from 1AAuto.com [ Ссылка ]
New Control Arm Bushing from 1AAuto.com [ Ссылка ]
This video shows you how to install a new control arm bushing on your 1996-2002 Toyota 4Runner. Rubber bushings help smooth out a ride, but are susceptible to wear or drying out and crumbling over time. This bushing is replaceable separate from the control arm, and you can replace it yourself.
This repair was done on a 2001 Toyota 4Runner SR5 3.4L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
1996 Toyota 4Runner
1997 Toyota 4Runner
1998 Toyota 4Runner
1999 Toyota 4Runner
2000 Toyota 4Runner
2001 Toyota 4Runner
2002 Toyota 4Runner
Tools you will need:
• Pry Bar [ Ссылка ]
• 19mm Wrench [ Ссылка ]
• 10mm Socket [ Ссылка ]
• 19mm Socket
• 21mm Socket
• Ball Joint Press
• Door Panel Removal Tool
• 1/2 Inch Impact Gun [ Ссылка ]
• 3/8 Inch Impact Gun
• Air Chisel
• Ratchet [ Ссылка ]
• Swivel
• Torque Wrench [ Ссылка ]
• Bungee Cord
• Gloves [ Ссылка ]
• Rust Penetrant
• Safety Glasses
• Silicone Paste
• Chisel [ Ссылка ]
• Floor Jack [ Ссылка ]
• Hammer
• Jack Stands [ Ссылка ]
• Sledge Hammer
• Wire Brush [ Ссылка ]
Subscribe: [ Ссылка ]
Check out our playlist:
Toyota 4Runner 3rd Generation 1996-2002: [ Ссылка ]
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
