In this video I show you how I replaced the ceiling fan speed switch on our 3-speed ceiling fan.

If you want to repair the switch when the chain has broken off, here is a video for that: [ Ссылка ]

TIP: Another way to separate the green half of the switch from the black side of the switch is to hold up the housing by only the green side of the switch. Then pop the three side clips off. As you pop out each clip, the weight of the housing will help keep the clips from snapping back in. The housing will separate and fall after you pop the three clips. Do this over a soft surface to avoid damaging the housing when it falls.

Make sure to check your wiring when putting the switch back together. I accidentally mixed up the wiring for L and 1 and the fan would only respond to the fast speed but it would shut off the motor on slow and medium.

The product links below are affiliate links. As an Amazon Associate I earn from qualifying purchases. I may receive a commission if you make a purchase after clicking on one of these links.

PRODUCT LINKS:
3-Speed Ceiling Fan Switch 2-Pack
[ Ссылка ]
3-Speed Ceiling Fan Switch 3-Pack
[ Ссылка ]
Ceiling Fan Pull Chain 120-Inches
[ Ссылка ]
Ceiling Fan Screws
[ Ссылка ]
Magnetizer/ Demagnetizer
[ Ссылка ]
Stanley 69-189 Ratcheting Multi-Bit Screwdriver
[ Ссылка ]
45 in 1 Pro Portable Screwdriver Set
[ Ссылка ]

Visit my Amazon storefront to view products that I have reviewed. As an Amazon Influencer I earn a small commission on eligible products.
[ Ссылка ]

свернуть