Click for more info and reviews of this Tekonsha Trailer Brake Controller:
[ Ссылка ]
Check out some similar Trailer Brake Controller options:
[ Ссылка ]
Click for more info and reviews of this HM25QR:
[ Ссылка ]
Click for more info and reviews of this HM27RR:
[ Ссылка ]
Click for more info and reviews of this HM29VR:
[ Ссылка ]
Click for more info and reviews of this HM32GR:
[ Ссылка ]
[ Ссылка ]
Don’t forget to subscribe!
[ Ссылка ]
Full transcript: [ Ссылка ]
Speaker 1: Today we're gonna be taking a look at the Tekonsha Prodigy P3 proportional trailer brake controller. This is gonna work great for one up to four axles. The party number is 90195. Now the big advantage we get with the P3 over other brake controllers especially the time delay brake controllers. With it being proportional, it senses the negative acceleration of our truck or the deceleration. And it brakes accordingly.
So if we really jam on the brakes hard, it's gonna give us braking power back to our trailer brakes very quickly.If we do it just in more of a stop and go traffic situation. It applies the brakes lightly. Essentially what that's gonna mean is when the trailer is doing its fair share of the work in a heavy braking application, you're saving wear and tear on your truck and the same vice versa on your trailer. So for a light braking situation, you're not overworking your trailer brakes causing those to wear out prematurely.Now the P3 can also be mounted in just about any position as long as we keep it straight in line with the direction of travel. That's gonna give you a lot of mounting options on where you wanna put it even if you wanted to go like down on the dashboard or something like that.
Really not gonna have any limits. Now to change are breaking output, we've got our buttons right here. You can see max power is gonna be 14 and we can bring that all the way down to zero.Zero would of course be when you don't want the brakes on your trailer to be applied. And then we can slowly bring that up to the adequate braking performance that we're looking for. That's gonna vary on road conditions and it's also gonna vary on the load that you have on your trailer.
The more weight, typically the higher you're gonna set this. And a rule of thumb is to set this just below where the wheels on your trailer will lock up. So on a lighter load, they're gonna lock up sooner than with a heavier load.So we'll just move that up. Then when we operate it, you can see it's gonna go up to that 2728 if that's where we have it set. Whether we do our floor brake, when we're in movement or a manual override here.
Now if we move that up, whether we hit the brake on our floor again or we hit our manual override, you see it's gonna up to what we have set. So we're never gonna have to worry about the trailer locking up and causing it to be unsafe. Now with those settings properly adjusted, you're never gonna have to worry about your trailer tires locking up and causing you to be in an unsafe situation.The next setting's gonna be our top right hand button. That's for our boost mode. Now that's gonna change the quickness and aggressiveness in which your brakes are gonna be applied. So for a lighter trailers, we really don't need it. We can typically brake with our vehicle. Everything's gonna be safe. But as those get heavier and heavier, we want those to come on more quickly and more aggressively to keep everything handling properly. Now in standard small utility trailers pulling it behind your vehicle, you're probably just gonna leave boost level off.You see we've got a truck here with a small trailer. Now in boost one, we're going to a slightly larger utility trailer, tandem axle. Boost level two, that's gonna go up to more like a fifth wheel style trailer and boost level three, again, a larger trailer than that. Now that changes the quickness and aggressiveness in which your brakes are applied. So as our loads get heavier, we want those to come on more quickly and more aggressively to keep everything nice and safe. Now we also have our menu here. The menu allows us to change our display settings, whether we wanna change the brightness or the color. It's gonna allow us to change the brake type so with this controller, not only are we gonna be allowed to use an electric brakes, but also electric over hydraulic.And then finally we've got our help mode here if we needed some assistance. The P3 will also allow you to program a couple of settings. So if you have different drivers that kinda like the brake controller set up differently or if you have different size trailers, you can have them pre-set in their, be a
