Buy Now!
New Control Arm with Ball Joint Set from 1AAuto.com [ Ссылка ]

Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, as well as integral ball joints that also wear. This video shows you how to install a new quality TRQ lower control arm in your 2007-2012 Nissan Altima.

• Check here for more videos on the 2007-12 Nissan Altima: [ Ссылка ]

This repair was done on a 2012 Nissan Altima Base 2.5L and the process should be similar on the following vehicles:
2007 Nissan Altima
2008 Nissan Altima
2009 Nissan Altima
2010 Nissan Altima
2011 Nissan Altima
2012 Nissan Altima

Tools you will need:
• Pry Bar [ Ссылка ]
• 18mm Wrench
• 21mm wrench
• 18mm Socket
• 21mm Socket
• Pickle Fork
• 1/2 Inch Impact Gun [ Ссылка ]
• Torque Wrench [ Ссылка ]
• Rust Penetrant
• Safety Glasses
• Jack Stands [ Ссылка ]
• Ratchet Strap
• Sledge Hammer

Subscribe: [ Ссылка ]

Check out our playlist:
Nissan Altima 2007-2012 4th Gen: [ Ссылка ]

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

свернуть