"👉 Prep your seam sealer. As always with two-part cartridges, equalize it upward into a paper towel to make sure you’ve got equal parts A and B coming out. Dispense 2-3 inches of material on a mixing board to make sure you’re getting a good mix before applying to the vehicle.

👉 Lay the material. For on-vehicle application, our best recommendation is to caulk out a bead. Always ensure you have a tight seal.

👉 Replicate the bead. Let the material do the work - you don’t need to move back and forth. Just keep the tip of the applicator against the surface and right above the actual material - don’t go too fast. The material will create that shape and texture you’re looking for without much effort.

👉 Apply material upright. You can apply the material directly onto the vehicle, and it will hold its shape. You can draw whatever you want to match the OEM appearance, and it won’t sag, drip, run, or fall off the panel. Brush out a stroke first to make sure you have a good seal, then apply your material directly on top.

#3mcollision #shorts

Products used in this video:

👉 3M™ Heavy-Bodied Seam Sealer 08308: [ Ссылка ]

To learn more, check us out at the following links:

✨ Instagram: [ Ссылка ]
✨ Facebook: [ Ссылка ]
✨ Twitter: [ Ссылка ]
✨ Website: [ Ссылка ]"

свернуть