Hello folks! Today I will show you my new restoration project. Today I will restore my old anvil When I bought it, I just dusted it off and that's it. But I often hear comments from viewers that a lot of things in the workshop need to be restored. I started slowly with a vise, and today we will be an anvil. Well, time to restore my anvil.

0:00 Review
0:14 Removing epoxy glue
0:26 Rust remover
0:44 Clean-wash-oiling
1:13 Metal circular brush
1:54 File and sandpapers
2:13 Surface polishing
2:47 Putty for metal
3:25 Primer
3:31 Painting
3:51 Stand
4:44 Final review
4:45 Test

As usual, rust and dirt were cleaned with the help of a means, then washing, drying and oiling. Then I used an iron wire brush to clean the patina. Then I used files and sand papers. After I'm polishing a surface of anvil. Then I used putty for metal and a primer. I applied two coats of paint. And as always, I made a test for you. I hope, you will enjoy this restoration project.

Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: [ Ссылка ]
Paypal: paypal.me/screwsandtools
Facebook: [ Ссылка ]
Instagram: [ Ссылка ]

#screwsandtools #anvil #restoration

свернуть