Today I make a End Table our of a 2x6 and some scraps from a cedar swing set I took appart. This 2x6 table sells on the marketplace very fast! Here's how I make it from start to finish and get it ready to be sold on the marketplace!
Cut List :
-Cut the 2x6 into 1.5" and 3" boards
-Cut 14" from the 3" board and rip it into half
-Resaw remaining 3" board into 0.75" thick 1x4s (3" wide)
-Cut 50" off one of those 1x4s and add dados, then rip to 2.5" wide, and cut into 12" slices
-Cut the remaining 1.4s into 4x 12" , 3x 14"
-Cut the 2x2s into 4x 23.5" for the legs
0:00 Ripping the 2x6 into the necessary boards
0:41 Resawing the 2x4 into 1x4s
1:25 Cutting dados on the table saw
1:49 Cutting all the wood to length
2:33 Panel Glueups
2:57 Drawer Assembly
3:59 Making the drawer handle
4:36 Routing the edge of the boards with a roundover bit
5:01 Assembly
7:31 Sanding to 120 Grit
7:45 Painting the main frame black
8:01 Assembling the table top from cedar planks
8:30 Final Assembly
8:50 Polyurethane for the cedar planks
9:05 All Done!
Subscribe for more content like this! #palletwood #palletwoodprojects #woodwork #woodworking #woodworkingprojects #diywoodworkingprojects
