- [ Ссылка ]
What Is CoverSeal Pen50 Water And Mold Resistant Penetrating Sealer?
CoverSeal Pen50 sealer is a penetrating silane siloxane sealer.
This means that it penetrates into the surface – concrete, stone, terrazzo etc. – without leaving a film on the surface.
It’s very water resistant. It’s made from a blend of silanes and siloxanes that penetrate into the concrete. These substances react to form a silicone resin that’s highly water resistant and highly repellent.
It does an excellent job of keeping water out of the concrete or stone, and it will protect it from mold growing. It will protect it from salts getting into the surface from freeze-thaw attack.
You can use it in both interior and exterior applications, and it will protect your concrete or other porous surfaces.
Features:
- Long term protective repellent layer
- Prevents Cracking and Spalling
- Water-resistant
- Excellent penetration into porous substrates
- Mold and mildew resistance
- Blocks salt damage – chlorides
- Breathable
- Reduces water absorption
- Reduces dirt pick up and staining
- Retards efflorescence
- Zero odor (low VOC)
- Easy to apply
Typical Uses:
- Architectural Concrete
- Concrete Block
- Splitface Block
- Roofs Tiles
- Porous and Dense Brick
- Stucco
- Exposed aggregate concrete
- Stone and Slate Tile
- Pavers.
Shelf Life:
- 18 months when stored at 77°F (25°C) or less in a dry and shaded area.
Theoretical Coverage:
- 260ft² per gallon (6.5m²/L) per coat.
- Very porous substrates will require a two coat application or higher application rate.
Finish reading about CoverSeal Pen50 on our product page here:
- [ Ссылка ]
Charles Idowu
Technical Director
10821 NW 50th Street Sunrise Fl 33351
Phone: 888-580-0693
Fax: 754-223-2467
Email: service@covertecproducts.com
[ Ссылка ]
Monday – Friday 8:30am – 4:30pm
