Discover how to start your Norton Clipper compactor engine by following these easy steps :
1 - Turn the fuel valve to the ON position. Fully press the dead-man handle against the main handle.
2- Move the choke lever to the CLOSED position.
NOTE: do not use the choke if the engine is warm or the air temperature is high.
3 - Move the throttle control lever slightly to the left. Put the engine switch on ON.
4 - Pull the starter grip lightly until you feel resistance, then pull briskly.
CAUTION: Do not allow the starter grip to snap back against the engine. Return it gently to prevent damage to the starter.
5 - As the engine warms up, gradually move the choke lever to the OPEN position. Position the throttle control lever for the maximum engine speed.
